The shelling peas planted in one of the winter squash beds are starting to get tall, so it was time to put up the trellis netting. My older daughter and I headed out early in the morning to avoid the heat.
It didn’t really work. 7am, and it was already feeling too hot!
The first thing we had to do was steal some of the lighter posts marking the 4′ distances for the low raised beds and attaching them to the tops of the bamboo stakes already in place, to support the netting at the top.
The netting wasn’t long enough, but we were reusing wire twist ties, and some of them were long enough to cross the distances at the ends. Later on, I’ll use jute twine or something to lace through the ends, so they don’t pull and sag too much once the weight of the peas are on it. We also made sure to leave a gap at the bottom for the winter squash vines to pass through. We don’t want any of those climbing! They would be way too heavy for this set up.
Later, we’ll at another trellis net on the other side, for the pole beans. The Seychelle beans planted in the gaps between the few carminate haven’t germinated yet, so it’s entirely possible we won’t end up needing it.
After that, it was just the usual morning rounds which, these days, includes cuddling as many kittens as we can convince to let us.
Right now, there is one white and grey that doesn’t run away and allows us to pick it up at any time. It even purrs. The tiny foundling – I think we’ll call it Button – needed no time at all to be okay with human contact. In fact, I have to watch my feet when it’s around! It is SO much smaller than the other kittens! It starts purring pretty much as soon as we picked it up, will crawl around on our shoulders, and when we put it down near out feet, it starts to rub on them.
I make sure to put it down near a food or water bowl as a distraction. 😄
I’ve made a point of adding water to one or two of the sun room kibble bowls to soften the kibble. I’m also seeing Junk Pile nursing the new baby. It appears to be in good hands!
I just came back from topping up the kibble outside, and Syndol was back and very hungry. I hadn’t seen him since yesterday evening.
When I paused to take a picture of Button, he wanted me to take his picture, too!
Oh, and today, I finally found a spot to transplant the Orange Butterfly flowers (milkweed) that have still been languishing in their Jiffy Pellets. Only three had germinated, and I had intended to direct sow more, but we just didn’t have a good place for it.
Well, since we didn’t end up planting poppies in where I’d intended, and yesterday, I buried Driver there, I figured it would be appropriate to transplant the butterfly flowers onto his grave. This bed can be a milkweed bed.
There are a lot of things that need to be done outside, of course – the list is never ending – but it’s going to have to wait. There are dozens of little thunderstorms blowing across the prairies right now, in both the US and Canada. I was hearing thunder while I was out, just a little while ago. Plus, as I write this, we are 26C/79F, with the humidex putting us at 30C/86F. I think the garden, in general, is going to like the heat we’re supposed to have over the next while. Much of what we planted this year prefers hotter temperatures. We’re supposed to keep getting hotter over the next few days and, a week from now, we’re supposed to have highs of 30C/86F. We’re supposed to have the storms blowing through today, plus a bit of rain tomorrow afternoon, but after that, we’re not expected to get more rain withing the 10 day forecast.
This morning, I harvested our first garlic scapes! Not a lot, but enough to enjoy today.
The strawberries in the wattle weave bed had one ripe berry to harvest.
It was quite tasty. 😄
I also saw our first female winter squash blossom! That was quite a surprise, since they don’t usually show up until later. The flower was oddly closed, though. It wasn’t until later that I saw why. One of the vine’s tendrils had wrapped itself around the petals before they opened! So when the outer edges of the petals did open, they were “strangled” and there was no access to the inside for pollinating. I did take off the tendril which, unfortunately, broke off most of the petals. We’ll see if the remaining parts of the petals will finish opening up to allow pollination.
When coming back inside after doing my morning rounds, I saw an adorable sight.
Brussel and her sprouts were snuggled in the tall grass! This is the first official, confirmed sighting of her with her babies.
I am not sure if any of them have shown up in the sun room or not. I couldn’t even see how many there were. Two, for sure, but if there was more, I couldn’t tell.
The final “first” of the day was…
… using our new drain auger.
I’d gone to check on the septic pump, when I realized it was running, but no one had used any water recently. I hadn’t heard it earlier, because I have the fan going in my room, and my room is pretty much the only place where it can be heard.
— major interruption as I fought with the septic pump and tank, again —
Oh, man.
Where was I…
Right… I checked the pump’s filter, and it was running dry. No liquid flowing through. I shut off the pump manually, primed the filter with fresh water then turned it on again. Sometimes, that’s enough. The pump, when it first turns on, shakes a bit, so before turning it on, I like to grab the outflow pipe to hold it steady.
The pipe was hot.
The pump was running dry for so long, and got so hot, the pipe itself was hot!!
That is NOT a good thing!
For the last while, when this happens, I would run a hose through the access pipe in the floor. I can tell where there are some bottlenecks and, by the length of hose pushed through, can generally tell when it’s all the way into the solids side of the tank. With the water turned on, I can usually push through any blockages and eventually get it so that, when the pump it turned back on, it no longer runs dry. Which means the float has dropped far enough.
I know. This shouldn’t work. The hose is in the solids side. The float is in the liquid side. But it works.
This time, it didn’t. Instead, I basically hit a wall, and the hose would go no further.
Worse, fluid was backing up the access pipe enough to start overflowing the floor drain.
Well, there’s a reason we got that drain auger. Now we just had to get it down the stairs.
The problem is the stairs. These are steeper than usual, with narrower steps. Just going down them, I basically turn myself sideways, using both the hand rail and the wall, and go down one step at a time.
With the help of my husband, though, I was able to get it part way down, and then I could carefully maneuver it the rest of the way on my own.
Then I spent some time reading over the manual again.
Unfortunately, the schematics in the manual did not show how the belt was supposed to be attached. The photos looked like colour photos that had been photocopied as black and white, so I couldn’t even see where a belt might be. As far as I could tell, there was only one way for it to go, and that was around the drum that the cable is rolled up in. I finally just went on my computer, looked up the order and the colour photos. There, I could actually see the belt around the drum.
The tips are secured with a screw and tightened with an Allen key that came with the auger.
It was missing.
I know it was there when I unpacked it, but it was not where I put it.
Someone will probably find it with their feet at some point, wherever the cats left it.
*sigh*
I do have a tool kit with Allen keys in both metric and imperial, so I was able to use that.
The next hour or so was spent using the different tips to clear the pipe. The water didn’t drain, though – until I remembered the pump was still off! That got turned on, and things cleared. Yay! All done!
Right?
Wrong.
The pump ran for a while, then started running dry again. So that got shut off.
I tried pushing the hose through and there was still that bottleneck a couple of feet past the wall. I ran the auger through again, then the hose. Eventually, I could determine that the pipe itself was clear; the problem was in the tank. With the pump running properly again, though, and so much well water being used to clear things up, the pump and the outflow pipe were so cold, there was condensation on them.
However, things were working again, so everything got cleaned up and put away… and there was much cleaning up to do. I had expected to find tree roots blocking things, but nope. No sign of roots. Just… solids, shall we say.
I just can’t seem to wash up well enough to feel clean again.
After I started writing about all this, I realized I had the fan going, and was I hearing the septic pump running or not? I shut off the fan, and yes, it was running.
I went to check, and discovered it had been running dry, long enough for the outflow pipe to be starting to get warm again.
This time, in pushing the hose through, I hit that barrier again, far enough from the basement wall that it had to be in the tank itself.
WTF?
This time, I got my husband to be in the basement while I went to check the tank.
After putting on a latex gripper thing I don’t know the name of, that attached to the ear pieces of my glasses and goes around the back of the head, to ensure they don’t fall off. I am forever paranoid that when I look down from a height, my glasses will fall off, and that last thing I want is for them to fall off into the septic tank!
Now, with the pump running dry, I expected to find it drained and the float visible at the liquid side of the tank. From above, you can see a larger opening over the liquid side and and a smaller opening over the solids side. A few feet above is the pipe that the float’s cord runs through from the basement, directing it over the solids side and above the liquid side.
When I opened the tank, it was over full, and just a foot below the pipe the float’s cord runs though.
This is not a good thing. Not at all!
I got my husband to the pump on.
No change. I could see some sort of bubbling on the solids side, but that’s it.
That would have been from water running through the hose at the time.
When there was no sign of the contents being pumped out, I covered the tank again, then headed back to the basement. The pump was still running, but it was running dry! At that point, I was able to relieve my husband from duty. 😉
Not only did the pump not drain the tank (we shut it off manually again), but water was backing up to the basement again.
It turned out the hose was still on.
With the hose off, I kept pushing it back and forth. It was definitely moving easier. After a few minutes, I turned the pump back on and…
It started training the tank!!!
So I hung around like a mother hen as it ran, until the filter suddenly emptied and it started running dry again. I still had the hose handy, so I primed the filter again, then ran it through and turned it the water on. After pushing it through a few times, I turned the pump back on. It started running for about half a second, then shut itself off.
Once that was done, I went back out to look into the tank. I could once again see the top of the tank, with the two openings. I could see the float on the one side…
It seems to be sitting on something.
I really don’t know what it was I was looking it. It just seemed to me like there was something in the tank.
We’re going to have to get it emptied. Especially since it overfilled the way it did.
So I called the septic guy. As I was explaining what was going on, he was quite perplexed. My using the hose like I do should not make a difference, because it’s in a different part of the tank.
After more descriptions and questions from the septic guy, he does have one theory. Because the pump does shake when it first turns on, he thinks we have an air leak. Most likely, the shaking has caused a crack, probably on the underside of where the pipe from the tank is attached to the filter. He won’t know until he sees it, though.
He’ll be coming out late tomorrow morning. A basic pump out will be $160. He won’t know if it’ll cost more than that until he sees what’s going on, and if he is able to do any repairs.
My older daughter, bless her, will be able to cover the cost. It’ll just take a few days for the PayPal funds to be transferred. (While I was doing all this, she was a sweetheart and did the cooking, etc., too)
Which means tonight, I should probably head to my bank and take out some cash to at least pay for the pump put. If it costs more, I can pay him the rest later.
Or maybe tomorrow morning. I really don’t want to go anywhere right now.
It took all day, with many interruptions, but I finally finished editing a video.
Then I had to figure out how to export it in a file size that was reasonable, without losing too much quality. A 16 minute video should not be 12 gigs!
I hope I found a happy medium.
Today’s video is actually sort of a part two. I posted a progress video a month ago. This one.
Today’s video shows the continued progress, getting all the beds shifted over, and the final plantings.
This job took so much longer than it should have! I am, however, happy with things as they are right now. It meant we finally got the last of the transplants in, and even did a bit of direct sowing.
We didn’t get too excessively hot – our high was 19C/66F – which made a huge difference. As I write this, we’re at 17C/63F, with a “feels like” of 15C/59F. That’s more my kind of weather!
Best of all, we had a break from the rain. We should have another break tomorrow, and then it’s supposed to rain for another two days.
Still, we got enough sunshine to dry some things out.
Today, I wanted to get some direct sowing done – finally!
I decided to plant chard where the spinach is done. That required first removing the netting I set up that turned out to not be long enough to go all the way around the bed. Once that was cleared and put away, I pulled the sad little remaining spinach plants – I wish I knew why they did so poorly! – and weeded the bed. We don’t have a lot of carrots, unfortunately. The cats would go in where there was no netting to keep them out, and use that corner of the bed as a litter box, digging up quite a few carrots in the process. I’d hope to plant more, but it’s too late in the season for carrots, now. Of the overwintered onions that had been transplanted at one end, there are three that survived the transplanting, and they are starting to go to seed!
Speaking of seed, I had both Bright Lights (a rainbow variety) and Fordhook Giant seeds. The cats had gotten into them and chew through the packages, so now they’re all mixed up in the a Ziplock baggie. These are not new seeds, so it will be interesting to see how well they germinate.
Once the planting and weeding was done, I grabbed one of the new nets I picked up at a dollar store and set it up around the bed. I added a couple more support posts around the perimeter. These are salvaged from the frame of a canopy tent a tree fell on, so they all have screw holes in them. Very handy to string line through, to hold the netting in place and keep it from just sliding down the supports! The netting is wide enough that it can reach the trellis netting in the middle, as well as to the ground outside the raised bed. I didn’t bother fastening the netting to the middle, since it’s mostly to keep the cats out. Once the netting was in place, it got some ground staples to hold it down, since it kept wanting to creep back up!
That done, it was time to go to the main garden area, and the last bed that got shifted over. The empty space between the shallots and the yellow bulb onions needed something in it!
The white patty pan and Magda squash that was planted in pots in front of the house did not germinate, so I replanted them there. I also grabbed the G-star pattypan seeds, and planted all three varieties between the onions and the shallots. I used broken bamboo stakes to mark were I’d planted pairs of seeds. I hadn’t pre-soaked them or scarified them, so I made sure they got a deep watering. Then I raked up some of grass clippings and used it to mulch around where the seeds were planted. Then I dampened the mulch, too!
I completely forgot that I wanted to replant the Seychelle pole beans by the Crespo squash. I can do that tomorrow. It’s really late for pole beans, but I’m going to take the chance.
Aside from that, the garden is now finally all in! There are no other beds to plant things in. That will be our next focus: build more beds for next year! Especially the trellis beds. Plus, of course, harvesting more dead spruces to frame all the beds.
Once that was done, I tended to the tomatoes in the old kitchen garden. I didn’t bother taking pictures, since it’s hard to see. They’re starting to get big and bush, and starting to flop. So I grabbed some jute twine and wove it around the pairs of bamboo stakes at each tomato plant, and the tomato stems in between. That was more finnicky work than I expected! The leaves are so dense the jute twine is mostly hidden, but it’s doing its job, and holding the vines up between the support stakes.
I also took some video of the raised beds that got shifted over. I’m planning to do a progress video. I was going to do it tonight, but I’m falling asleep at my keyboard, so I think I’ll call it a night, and work on it tomorrow.
All in all, it turned out to be a decently productive day! Not bad for it starting out as such a bad pain day, this morning. Not bad at all!
I was very happy for a pleasant breeze to cool me down while I was working. I got the last of the bed turned and weeded, the boards laid out to mark where the log frame will go, and the soil evened out and leveled off as best I could.
Since I was wanting to finish off the onions and shallots, I decided to work in a grid instead of rows. I marked off 5 rows lengthwise first,, about 3 or 4 inches apart, then made cross rows, also every 3 or 4 inches apart.
Once the lines were marked out, I used the jet setting on the hose to drive water into all the marked lines. It makes it messier to transplant into, but it evens out the soil and gives deeper moisture for the roots to reach for.
After that, I just laid out the transplants where the lines crossed, starting with the yellow bulb onions at one end. I got to about half way down the bed, maybe a little more, before I finished them. Then I planted the shallots at the opposite end. Last of all, I used the grass clipping mulch I’d removed earlier today, to scatter a light mulch around the transplants.
I was very happy to see that this left me an open space where something can be direct sown. I’ll go through my seeds to see what I’ve got that will mature in less than 2 months, since we basically just have July and August left for a growing season.
This is really late for onion transplants. My intention had been to interplant them with other things, but that doesn’t really work out with the winter squash and melons, since those will get bigger and overshadow the onions. At least I got some in with the tomatoes.
We shall see if the weather holds long enough for all these onions to fully mature!
I’m now going to let my self breathe for a bit. I have some direct sowing to do, including where the spinach was planted, and that’s about it. After a break, I’ll get back to working on the trellis beds. Hopefully, we’ll dry out a bit and the winds will die down, and we’ll be able to harvest more logs for the raised bed frames. The forecast of rain to start this evening and continue for about 4 hours has changed. Now it’s saying we’ll get some rain for about an hour, around 10pm. On Friday, though (today is Tuesday), they’re still saying rain all day, starting about 5am Friday morning, through to 1am on Saturday morning. Aside from the brief rain we’re supposed to get tonight, though, we’re not supposed to get any rain at all until Friday.
I might actually be able to do some mowing! How exciting!
In starting on the last bed that needs to be shifted, I broke up and somewhat leveled the ends and one side, so I could lay out the first boards. The bed that is being shifted had quite a lot of grass clipping mulch around the edges to try and keep the weeds at bay – or at least easier to pull. In the previous bed I’d done, I worked the grass clippings into the soil as it was shifted, but this one had enough that I removed most of it, instead.
Then it was time to start loosening the soil that needs to be shifted, weeding as I went along. It has been taking longer than I expected. I’m shocked by how far from the trees I’m fining elm roots. They have reached pretty much all the way to the end of the bed! I’m not trying to pull them all out, since the bed it going to be raised higher than before, but I could get some of it. Particularly the roots that would get caught up in my garden fork as I loosened the soil!
I suppose it would have been better if the soil in this bed got sifted, but it’s still too wet for that and would just clog up the hardware cloth.
I got maybe a third of the bed weeded and partially shifted before I had to stop for breakfast and hydration. I’m not looking forward to going back out. It’s about 9:30am, and we’ve already reached our expected high of 19C/66F. While my weather app says the humidex is also 19C, when I’m out in the full sun, it sure feels hotter, even though the morning sun is just barely reaching above the spruces while I’m out there! The winds are picking up again, too, and I swear I heard thunder in the distance. There are no storms in our forecast. We’re expecting showers starting around 7pm. It’s actually supposed to start cooling down a few degrees from now on. I think I’ll actually give myself a couple of hours before heading outside again. Now that I’ve got the big stuff done around the bed, the rest shouldn’t take long, and I should be able to get most, if not all, of those onions transplanted when it’s cooler, and before the showers start.
The rest of the garden seems to be holding out well. I’ve removed the mosquito netting that was over most of the melons in the first trellis bed. They are starting to get big enough that they need the extra room. All the other transplants seem to have gotten over any transplant shock and are starting to grow noticeably bigger and stronger. That zucca melon that I found looking smushed, however did not survive, so we’re down to just two of those, and they both look strong and healthy.
I still feel like I’m behind on everything in the garden, but things do seem to be managing all right so far.
I should probably prune it off for now, so that more energy should go into the plant itself getting bigger, but it’s just one of three plants blooming, and it looks so pretty.
We do still have a lot of standing water all over, but the area around the garden bed I needed to work on was much improved. Still very wet, to be sure, but at least workable.
The weather forecast predicted a quick thunderstorm and rain at about 8am, so I was out there by about 7. There was a good chance the tiny storm on the radar would miss our location entirely, so I wasn’t too concerned. Mostly, I wanted to get things done before it got too hot – and things were getting hot pretty fast!
The main thing I wanted to get done was to break and turn the sod in the new area. That ended up taking a bit longer than expected. The wet ground did make it a bit easier to remove some of the bigger tap roots and rhizomes. This area, however, turned out to have a lot more tree roots under it – most of which were deep enough to leave alone, but shallow enough for the garden fork to get hung up on them. It also has a lot more, and bigger, rocks. Again, a lot were deep enough to leave after the sod was turned, but in many places I couldn’t push the fork into the ground without having to fight to get around rocks.
But that part is now done, and I left it to go in for breakfast. It’s supposed to be very hot today, so I don’t mind leaving the exposed roots to bake in the sun. The stalks from corn that was grown here last year were still around, so those are going to be buried when the soil that needs to be moved, gets shifted over.
I had the hardest time falling asleep for some reason, but woke up at 5am, so I’ve only had 2 or 3 hours of sleep. I can barely keep my eyes open right now.
Napping through the hottest part of the day is probably a good idea, anyhow!
The Dalvay peas seemed to just explode overnight, and almost the entire row is filled with pea shoots. The Yukon Chief corn has also seen quite a growth spurt.
The beans don’t seem to be doing well this year. I could explain that away for the older seeds, but the purple bush beans were fresh seeds, and there’s just one bean that has sprouted! Hopefully, more will appear in the next while, but if they don’t, some of them will get a second sowing or, if I’m out of a particular seed, something else will be sowed in place.
My main goal for this morning was to get those tomatoes and as many onions as I could, transplanted, and I’m happy to day that has been accomplished!
The first thing was to break up the clumps of soil that were hilled into the new bed location and pull out as many roots and weeds (and rocks) as I could. This bed was in so much better shape than the previous one, it didn’t take very long at all. From there, it was using the thatching rake to even out the hill of soil between the boards – the north send, where the bed was extended, had to have more soil spread into it – and level the top for planting. Of course, more weeds, roots and rocks were removed at the same time.
Then I brought the transplants over. There were seven San Marzano tomatoes left, including one that wasn’t looking very good at all. I also happened to have exactly seven bamboo stakes left, to use as their supports, which was nice. I pre-dug holes for them down the middle of the bed, as evenly spaced as I could eyeball it, then used the jet setting on the hose to fill each hole with water, and basically drill the water deeper into the holes. I want those roots to have water below them to encourage them to grow deep.
I removed the transplants from their cells into the bottom drain tray to make it easier to carry them around. That last tomato that looked the most beat up, though, didn’t come out with its soil, but broke off, instead. I could still see some roots on the stem, though, so I kept it. I just transplanted that one at the north end of the bed, closest to the trees. I don’t really expect it to make it, nor do I expect that end of the bed to do as well as the rest, because of those !%$@# elms.
The tray still had vermiculite topped soil in it from the tomatoes that didn’t survive, so I dumped all that into the drain tray, then put a bit of it around each of the tomato plants. I didn’t bury the stems deep – they didn’t need it – but I did plant them deep, so each one is in a bit of a hollow, so water will flow towards the roots and seep into the soil there, instead of flowing down the sides of the bed.
Once the tomatoes were in, I made a narrow trench all around the perimeter of the bed, except the north end, which doesn’t quite quite a much soil, still, so it’s basically a long U shaped trench. That got watered with the hose on the jet setting, too.
For the onions, I chose the tray with the yellow bulb onions. I keep forgetting the name of the variety. It’s a good thing I record all this here in the blog! They are Frontier onions, noted for strong necks, consistent size and disease resistance. They are supposed to mature 100 days from transplant, which means I’m really late in getting these in the ground. Hopefully, we’ll have a mild fall, and the frost will hold off until October.
The tray I used for the onions was a vegetable party tray, divided into 4 spaces around the perimeter, and a shallow circle in the middle where a dipping sauce was kept. I am really liking this design. After giving the tray a thorough soak, to make it easier to separate the onions, I could just grab on section of onions and carry it with me as I went around the bed, pulling out and spacing the onions in the trench. I was able to finish off one section, plus another dozen or so transplants from another.
Once those were planted, I make more shallow trenched between each tomato plant and repeated the process. I was able to fit three or four transplants between each tomato, with enough space to fit five in one area. In hindsight, I probably could have planted the ones around the perimeter closer together, but what’s done is done. I wasn’t able to fit even half the tray of onions in!
The last thing to do was give the transplants a gentle watering, to settle the soil around their roots. It actually started to rain while I was doing this, but so little, I barely got wet.
When I looked at the forecast last night, it was saying we could expect rain for a couple of hours, starting at about 7 this evening. It is now saying the rain will start at about 5pm, and continuing until 1am! Today is Saturday, and the forecast says we will not have more rain again until late Wednesday night.
We shall see.
Now that the tomatoes are in (yay!!), there are the rest of the yellow onions to transplant, a few remaining shallots, and the Orange Butterfly Flower. I was going to try direct sowing some of that, but it just didn’t happen. I still don’t know where I want to plant them, since it has to be in a permanent location. I want it to be near the main garden area, but where I think would be best for them is going to see a lot of traffic and commotion as we build the frames for the beds.
The main thing, though, is the tomatoes are in. This bed will need to have mulch added around the sides, to keep the soil from being eroded, until we can get it properly framed.
This leaves one more bed to shift over. Like this one, the last one shouldn’t take very long, comparatively speaking. It’s more a matter of working around the heat of the day. From the looks of it, the entire bed could be filled with the remaining onion and shallot transplants. I might even have some left over.
Today, however, we’ve already reached our high of 21C/70F. It’s not even noon yet, which means we could still get hotter over the afternoon. Tomorrow’s high is supposed to be 22C/72F, and then we’ll get our hottest day on Monday, with an expected high of 27C/81F. After that, it should cool down a bit, but still remain in the 20’s for a while. Hopefully, we’ll have enough dry days to get the lawn mowed, and maybe even cut/process more logs to frame the beds. I might just go ahead and scythe in the outer yard a bit, tomorrow, so the hay can dry for a bit before being gathered and used as mulch. Grass clippings are great, but when green, wet clippings are dumped in a pile, the inside of the pile gets astonishingly hot. Then it gets all slimy, while the exposed grass on top dries out. Once the insides gets slimy, it’s not much use as a mulch and we just leave it to compost.
Meanwhile, it turns out we need to make another trip to Walmart. We’re almost out of kibble, and first disability check doesn’t come in until the middle of next week, when we do our first stock up shopping trip. The Cat Lady has said she’ll acquire some cat food donations for us, but they’re going to be in the US for a couple of weeks, so I don’t expect that anytime soon. They’re packing their bags now.
Well, time for me to get changed and head out to get kibble!
The mulch around it was flattened, too, in an almost perfect circle. It looked like a cat took a nap on it!
I lifted it up and found that it did not seem to be damaged. I found some short support posts that used to be part of a canopy tent frame that a tree fell on a few winters ago. I set one beside each melon. A cat could still lie on the mulch beside in between, but not on a melon plant – at least not without being right up against a stick!
Yesterday, I’d turned the raw sod on the next raised bed that needed to be shifted. I’d hoped the exposed roots would get to back in the sun, but instead, they got watered by the series of storms we got. I was going to my mothers, so I didn’t do any weeding, as it would have been too messy. Instead, I used the thatching rake to break up some clumps around three sides and level them a bit, then set out boards to mark where the logs will go.
Then I just used a garden fork to turn the soil from the bed in it’s old location, piling it into the new location. Against, I didn’t try to weed, so it went really fast. This bed was in so much better condition than the last one, with all that creeping Charlie in it! Once the soil was moved, I used the rake to level the edge, as well as the area where the bed was that would become path, before adding the last of the boards to frame around it.
Then I had a few things to do, before doing to my mother’s and helping her with her groceries. These days, she just gives me her list and I do the shopping for her, and put it all away. It was actually a pretty good visit, until just before I left. She’s started to talk about coming here to the farm for a visit. The problem is, she behaves so badly here, especially towards my family, they don’t want her here. She also has no interest in seeing what we’ve done here at the farm. She want to see reasons to tell us what we’re going wrong, tell me how terrible I am at taking care of the place (because I’m doing things differently than she did), and rag about what a terrible parent I am for keeping the girls tied to my apron strings (the idea that they chose to out here to help with the property, and their disabled father, just doesn’t sink in with her), and so on. I tried to explain to her about the problems with her behaviour. The truth is, I’d love for my mother to come and visit. I’d love to be able to show her the progress we’ve made, and talk about our plans. But that is not anything my mother has any interest in.
One of the things I’d showed her on my phone was some video I’d taken of the tree that fell on the outhouse, then of the swaying of the trees. She commented on all the “dry” trees (the dead spruces), and I said we need to cut them down. She asked if I’d talked to my brother about this and I told her, yes (I’d already told her I’d sent him the video), and that we’d be cutting down the dead trees. Then I corrected myself and said that it would mostly be my younger daughter doing that.
At which point, my mother started saying that using a chain saw was a “man’s job”, and she can’t do that. I told her, Mom, anyone can use a chainsaw. But that’s a man’s work! I should get my brother to do it!
So… we aren’t doing enough, because we’re not doing things the way she wants them to be done, but we’re also not supposed to be doing any “men’s work” because we’re female.
Well, at least this time, she didn’t go on about how sorry she feels for me, not having a man around the house.
I guess, because my husband is disabled, he’s not a man anymore?
She says awful stuff like that all the time, but when I tried to explain that people don’t want to be around her because of this, she twisted things around to make herself as the victim and me as the big meany.
Not a good way to end the visit.
I did have somewhere else to go, though. I’d made arrangements with a homesteading friend to buy some eggs. She wasn’t going to be home, so they were going to be tucked into a safe spot outside, where I could also leave the payment. I didn’t want the eggs to be outside in this heat for long – when I started writing this, we were at 23C/73F, with the humidex putting it at 28C/83F, and it was hotter where my mother lives than here – so I wanted to leave as soon as I could. I actually got there before my friend had left, so we even got to catch up for a bit – and she gave me extra eggs, because she needed the room in her fridge! 😄
I was considering whether or not I could continue on the bed once I got home, but there’s no way I can do that kind of work in this level of heat and humidity. It will wait until the morning.
Tomorrow is supposed to be even hotter by the afternoon, and we’re supposed to get more rain in the evening.
*sigh*
I’d really like just a few day’s break in the rain, so the ground and dry up a bit and we can try mowing some lawn again. At least the parts we managed to do, previously, since the taller stuff is just too wet. We’d need probably a week without rain before we could do anything about those areas.
Or a couple of cows to graze the outer yard for a week or two!
We really need some grazing animals! As long as we could keep them out of the garden beds, I’d be letting them graze in the main garden area. That would be good for the soil, too.
My daughter wants sheep, for their fleece, as she wants to spin her own yarn. I would like a couple of milk goats. That would be on top of the chickens I want to get!
We’ll get there. It might take a while, but we’ll get there.
For now, building up the garden beds is the main focus.
My brother and I were both saying how we don’t remember there ever being so much water in the yard before. Even when it flooded, a couple of springs ago, it didn’t get this bad. Yes, the flooding was more severe in places, but the ground didn’t get saturated right up to the house, and stay saturated for so long, like it is now! Every time it rains, the standing water returns, because the ground it just too saturated to absorb it. This, even though we have high drainage in our soil, what with it being basically gravel with a few inches of top soil.
Oh! I found an excellent picture of what our soil is like, at this web site.
This image belongs to Joselito (Lito) M. Arocena, UNBC and was taken in Edmonton, Alberta, but it’s exactly what we’ve got here, too. If there is any different I could find, it would be that we have more small rocks in between the second and third layers.
I keep hitting them with the garden fork or spade, while shifting the beds!
Yet another reason why raised beds are the way to go for our gardening!
For now, I just want to get these last two beds done, and get the last of the transplants in. If there’s room for direct sowing, that would be bonus, at this point.
My focus was on breaking raw ground and flipping sod in the area the bed will be shifted to. I’d only done about a foot at one end, last night. I was able to turn all the sod in the marked off area with only a few interruptions, like breaking up a cat fight! I was hitting a lot more rocks with the garden fork in this bed, compared to others! With so many, I only took the time to toss out the larger ones.
By the time it was done, things were starting to get hot, so I stopped there. The next step will be to move enough of the soil from the bed’s current location to be able to set out the boards marking where the logs will be. Then the soil will be moved to the permanent location.
For now, however, the turned soil will be left for the feed roots to bake in the sun. I’ll pull out the biggest ones as I continue, but most of the smaller roots should get killed off just from being exposed to heat and drying out.
I’m hoping to get this bed done and the last tomatoes transplanted, fairly quickly. This afternoon, we’ll be heading out to get birthday pizza. Along the way, we need to go to the Purolator drop off in my mother’s town. Our 4 pound bucket of lysine is in! Tomorrow (Friday), I’ll be going to my mother’s to help her with groceries, which usually takes up most of the day. The forecast now says rain on Saturday, but not until the evening.
Still lots to get done!
The Re-Farmer
ps: I was about to publish this, when I saw movement on the critter cam. Was it the mama going to the babies?
No!
It was a racoon, looking for kibble!
I used the critter cam to shoo it out, only to see a skunk run past the sunroom door after the racoon ran out.
The Re-Farmer 