While I was waiting for the clinic to call about the cats, I was able to find a bunch of things for the garden.
While at the Canadian Tire, I just couldn’t resist.
I picked up some bare root strawberries, and asparagus crowns.
The asparagus that was have now, which has been drowned out for the past couple of years, is a purple variety, so I grabbed a package of Purple Passion to basically replace them. They had a couple of varieties of green asparagus, and I chose Jersey Giant. Each package has 5 crowns in it.
We already have the Albion Everbearing strawberries that did so well last year, except for when the deer kept eating the greens. I got another everbearing variety – Ozark Beauty. I also want to try the White Carolina strawberries again. We tried them a few years ago, but not one of them survived.
I am thinking of planting these in a section of the main garden area that has been covered with a black tarp for a couple of years, now. We had grown squash and pumpkins in there, previously. I want to move the tarp to cover the rest of what used to be the squash patch. Hopefully, the asparagus will do better there. I’ll probably interplant them with the strawberries, too.
But not yet.
Something else I got but didn’t get a picture of were some 12′ (I think) lengths of tubing. They’re more flexible than the 5′ lengths I tried before. I plan to use one of them, cut in half, to make a netting support over the 4′ square Albion strawberry bed, so we don’t have to worry about them getting eaten by deer again! I might work on that tomorrow.
The first thing I did when I got home, though, was pot up some pre-germinated melon seeds. The four Sarah’s Choice seeds were ready to go!
I had just enough pre-moistened seed starter mix left to fill 4 cups to plant them in. The cups have drainage holes in them, and they and the other seeds are now in a tray over the heat mat. I took the old heat mat out completely. It was cold, and no longer working.
There are a few other seeds starting to germinate. Nothing with the Zucca melon. I expect to be planting more pre-germinated seeds in a couple of days. I want to give some of the seeds more time.
With the old heat mat removed and the new one shifted over, I also moved the tray with the seedlings over. There are still a few blank spots, but enough sprouts are up that it shouldn’t be on a heat mat anymore – but I do wish that old mat was still working though, because I think they would still do better with one.
That done, I headed outside again.
I’ve noticed that the cats have really been digging around in the winter sown garden bed at the chain link fence. While I was at the Dollarama today, I picked up some row covers that I hoped would work out.
This bed is narrow, so those metal supports would be fine for it. It was the mesh that was important. It’s open enough that the wind can blow through it – the mosquito netting we’ve been using gets turned into a sail rather quickly! – and rain can get through, but it’s fine enough to keep the Chinese Elm seeds from choking everything out, once those start to drop. Plus, the ends can be closed up, which will keep the cats out.
I wasn’t sure how many I would need to cover this garden bed, so I got 5, just in case. In the second photo, you can see some of the damage the cats have been doing.
Setting them up with the wire supports was a bit of a challenge! The wire is supposed to be run through evenly spaced pockets in the mesh. That was the first problem! The wire is thin enough to pass through the mesh. It was hard just to get it through the opening of the pockets! The other end, meanwhile, kept getting caught up in, and through, other sections of mesh.
The set came with a solution for threating the wires through the pockets, though I doubt it was intended as such. Each kit has a bundle of 5 supports. They are held together by fitting the ends into a white plastic cap, one for each bundle of ends. I used one of those caps on the end of a wire support and, as long as there was enough tension to keep the cap from falling off, the wire slid through quite easily. If the cap did fall off, it could be pushed back through the pocket to the wire.
It took a while to get the hand of it, though. The wires and the mesh kept wanting to get all tangled up with each other. Plus, every stick or twig or leaf on the ground seemed to automatically get caught in it! What I eventually figured out was to first make sure the netting was bunched up in the middle of the wire, then stab one of the ends into the ground next to my leg. At least a little bit. I was sitting in the shade, so while the ice and snow was melted away, the ground was more frozen than in other places. It was enough to keep the wire upright, though, and I could just add the next ones as they were done.
I set up the first two assembled kits at each end of the bed. The kits have a drawstring at each and to close them up, but I needed to overlap several of these to ensure no gaps. Once the ends of the beds were covered, I assembled two more kits to fill in the space. Once the ends were closed with the drawstring, those got set in place with ground staples. In one area, the two kits overlapped enough that they didn’t need anything else, but another join got secured with more ground staples.
I think this will work out very well for now. I could probably remove that mosquito netting entirely and use it somewhere else. If the winter sowing survived, this netting can stay until things start getting too tall for it. The mess easily slides up and down the wire supports, so it’ll be easy to reach under to weed.
The bed was incredibly dry, though, so I used the water from the heat sink in the portable greenhouse to water it, then refilled the container. With sort of defeats the purpose of the heat sink, but there are no plants in there to protect right now.
When it was time to refill the container, I also prepped something else I found in the Dollarama.
Coconut fibre bricks! It’s been years since I’ve seen these. I’ve got one of them in a bucket of water to expand until tomorrow. I plan to incorporate it into the soil that’s in the pots I’ll be using for the luffa inside the portable greenhouse. It will be a while before the luffa can be transplanted, I’ve got time to get those ready. With the coco fibre in there, it should help keep the soil fluffier, and hold moisture more evenly. I’ll save the second brick to amend soil in one of the garden beds, later.
The garden bed at the chain link fence is not the only ones the cats are damaging. After I finished refilling the heat sink in the greenhouse, plus the watering cans, I checked out the main garden area. The garlic bed and the summer squash bed have both been dug into. Some of the garlic was almost completely dug up! We’re going to have to cover them.
Tomorrow.
For now, though, they have the supports in place.
These are the parts and pieces from a gazebo tent that was broken when a piece of tree fell on it. I had a bunch of shorter pieces – all pieces that were broken in half – that I put around the garlic bed, as it won’t need a lot of height. The tent pieces all have holes in them that had screws or pins running through them, which are prefect for holding twin in place. I ran the twin through to make Xs across the bed, as well as straight across and the sides. I did the same with taller supports I put over the bed sown with summer squash.
We have a couple of types of netting that is large enough to fit over these. We’ve got black netting that is more open, but for that, we’ll have to put something on top of the support posts, so they won’t tear through. There’s also the mosquito netting I’ll be moving off the chain link fence. We have other netting, too, but they are for trellising, so the openings are large enough for a cat to fit through.
The roll of bale twine I used on this has been sitting in the sun room all winter, and the cats have been pulling out the middle and playing with it. By the time I got things untangled while threading it through the support posts, it was starting to get quite chilly out there! As I write this, our temperatures had dropped just below freezing. According to the short range forecast, though, we’re expecting overnight lows of -6C/21F. At those temperatures, we’ll want to put some sort of protection over the winter sown beds. Something more than netting! That’s the down side of having removed the mulch, so the ground could thaw out. I will probably spread some of the mulch back lightly over the beds again. The beds are even looking like they could use a good watering, too! We didn’t get a lot of snow this winter, so things are pretty dry right now, and there is no rain in the forecast for some time. What rain and snow we’ve had lately hasn’t been enough keep these beds from drying out.
Tomorrow, we’re looking at a high of 15C/59F. That will be a wonderful temperature to get things done outside!
As long as I don’t overdo it. I got chilled enough while working the twine through the supports, I still haven’t warmed up, even after a hot meal and a hot cup of tea! My entire body is stiffening up and starting to really ache.
Time to pain killer up and get to bed. Hopefully, the painkillers will be enough to let me get some sleep!
The Re-Farmer
The Re-Farmer 