Our 2025 Garden: transplanting winter squash

One thing about not being able to mow/clear around the main garden area is…

We’ve got a massive crop of dandelions – and they’re going to seed right now!

I decided to plant the all the remaining winter squash into one bed. With these ones, I’m not looking to save seed, so it doesn’t matter if they cross pollinate. The bed I decided to put them in has been solarizing for quite a long time now.

The first thing to do, though, was get in with the weed trimmer and clear around the bed.

There were clouds and clouds of dandelion seeds!

The plastic did a great job of protecting the soil from that, though.

Once the weed trimming was done, I removed the boards and bricks holding the plastic down. One of the boards had been used to roll the plastic up for storage, and I used that again.

It’s amazing what can survive under the heat of that plastic – and the lack of any moisture!

So my first job was to break up the compacted soil and so what weeding needed to be done.

I was finding elm tree roots at the end furthers from the elms.

It was while I was working on this that we got company. My brother came over today. He had some stuff he needed to get done, so I just went over to say hello before getting back to my own work.

The first thing he did was comment on how I needed to not die on him! Apparently, I was extremely red and flushed from the heat! I did make sure to sit in the shade and hydrate, often, but after his comment, I made a point of going inside and sitting in the air conditioned living room for a while before getting back at it.

As I was working, I thought about how to bed protect the bed. Seeing how, even with logs added to the sides, the peas and carrots bed was eroding on one side, I wanted to prevent that right from the start.

So, once the soil was weeded and fluffified, I decided to make use of the boards that had weighed down the plastic, and make temporary walls.

I first raked the soil in from the edges. In going through my supplies in the garden shed, I brought out a bundle of metal stakes that were salvaged from the Walmart market tent we had a tree fall on, several years ago. I’d used these to mark out where to shift the garden beds last year, and this particular bundle all had pinwheels – or the remains of pinwheels – taped to them. A pair of them still had twine wrapped around them, so I put those two at opposite ends of one side. I then used the last of some small bamboo stakes I had to fill in the gaps a bit, to support the boards, as they are all different lengths and some are pretty rotted out and broken on their ends. Once the boards were in place, I raked some of the soil against them to hold them in place and create a shallow trench in the middle.

The soil was insanely dry. Once the boards were in place, I gave the trench a thorough watering. The water just disappeared! Eventually, I got it to the point that the water would actually sit for a little while before getting sucked away.

I used the plastic collars to work out the spacing, setting them into the soil just deep enough to not blow away, but not so deep that they would restrict root growth. Then, each collar got a handful of manure mixed into it. The soil around each collar got shallow trenches made around them, too. Then everything got another thorough watering.

The metal stakes handily divided the bed into three sections, and there were three varieties of squash to transplant. There were six Mashed Potato squash, and I decided those would go on the end closest to the elm trees. I figured, if the elm roots started crowding into the bed, it would be better to have the variety with the most plants at that end, in case we lost one or two. There were five Baked potato squash, which went in the other end, and four Sunshine squash were planted in the middle section.

After being planted into the collars, everything got another watering. Then I grabbed the wagon and went into the outer yard, where sections have been mowed, and raked up dried grass clippings to use as mulch.

While working on this, I could hear various noises and saw my brother driving around in the zero-turn lawn mower, using it as transportation. One of the things he did today was add a ball hitch, so he could use it to tow a small trailer.

Then he came to get me. He even set up a stump of a log I had in the shade of the trees, on the trailer as a seat for me! A seat is why that log was set up in the shade in the first place, so that was rather funny.

I did need his help to steady myself to get onto the trailer, though. 😄

One of the many things he got done today was replace the long screw eye we’ve been using as a pin on the slide bar for the gate. He got two different possible replacements for it and wanted me to choose one of them. After we got that figured out, he gave me a ride back to the garden.

That was really fun!

Meanwhile, the wind has been picking up through the day – and the elm trees are dropping their dried out seeds.

There were times when it was like a snow storm of seeds. Our lawn is thick with them and, in mere minutes, the soil in the garden bed I’d spent so much time clearing out was getting filled with seeds!

Mulching around the squash was as needed to keep those frickin’ seeds off as much as anything else! I even tucked a light mulch of grass clippings inside the collars, carefully setting it around the stems.

Once the bed was mulched, I brought over the rolling seat and settled down for one last watering. The grass clippings are bone dry, and it needed to be soaked all the way through. This way, the damp grass clippings will keep the soil both damp and cool, and is more likely to allow water through. When it’s completely dry, the grass can act as a thatch, and prevent moisture from reaching the soil, instead. So I took my time and made sure the mulch was completely soaked.

By that point, it was time for supper, and I was done for the day! It was 34C/93F and holding. I didn’t catch what the humidex was, but it sure felt hotter.

At the moment, the high forecast for tomorrow is “only” 20C/68F, which is going to feel blessedly cool after the past couple of days! We might even get a bit of rain at around 7am.

Hopefully, I’ll get there rest of the transplants in tomorrow. I have both tomatoes and melons blooming right now! So those have priority.

I’m going to be pretty much living on painkillers for the next few days, but it needs to be done!

Once the garden is in, I want to just sleep for a week.

Which won’t happen, but I can still fantasize about it! 😄

I’ll be paying for it tonight and tomorrow, but I’m very happy with how much I was able to get done in the garden today. Those winter squash could have been planted a couple of weeks ago, at the size they’re at! I noticed some even had flower buds already on them.

I’m so happy to be back in the garden!

The Re-Farmer

Our 2025 Garden: they’re aliiiivvvveeee!!!

With the pre-germinated seeds potted up and the tray on top of a heat mat, I have been eager to see how long it would take for the seed leaves to break through.

Not long at all! It’s been only a week since the seeds were set up to pre-germinate, and here we are…

The Baked Potato squash have the most leaves emerged. There are some Mashed Potato squash pushing their way, or just visible, though the vermiculite. Even the Arikara squash is just visible through the vermiculate. Nothing visible on the Sunshine squash, yet. Nothing visible in the luffa, eggplant or peppers in the other tray, either.

Oh, and I checked the last luffa seed still in the pre-germination container. I gave it a squeeze, and it was hollow; just the shell left. So it’s 3 out of 4 seeds that successfully pre-germinated.

After taking the above picture, I pulled the winter squash tray out and rotated it on the heat mat, in case there were some warm and cold spots. The silver insulating material I put under it seems to be working; I could feel more warmth than when it was just the cardboard.

I have more of this insulating stuff left and was thinking of putting it around the drain pipe I was trying to clean out yesterday, in the general area where I think the gunk might be freezing. I know the bottleneck starts at about 6′ from the access point.

The problem is, for most of that area, access to the drain pipe is blocked by a heat duct and the frame built around the window on the inside, with a platform to hold a fan. It could be done, but I would definitely need someone else to give me a hand.

I’d also want to clean away the many years of dust, dirt and cobwebs first, too!

Though, now that I’ve looked at it, I am now doubting that ice could be the issue. There is that heat duct in the way. I would think any heat lost through the metal of the duct would be enough to keep things from freezing.

It wouldn’t hurt to have the pipe insulated in that section, though. I haven’t unrolled it, but there’s at least 6 feet of the insulating material left.

This stuff is turning out to be handy for all sorts of things, but insulating pipes is what the dimensions of this particular size of roll was designed for.

It seems to be doing well for keeping seed trays warm in a cold basement, too!

The Re-Farmer