carving tools

Wood carving: testing the new gouge

/ Re-Farmer / 16 Comments

Lo and behold, I had an open day today! Which means I finally had the chance to do a bit of wood carving and test out the wood gouge I got a month ago.

I had a particular piece of maple from clearing behind the pump shack that I wanted to use. After looking at ideas for a while, I decided to make an olive server. Something along the lines of this.

It took me about 5 or 6 hours, but I got it done! :-D

Photo heavy post ahead! :-D

Here is what I started with.

This is about half the length of the original piece. The length was decided by a bend in the wood. :-)

I now needed to create a slightly flat bottom, and take about 1/3 off the opposite side to create the top of the bowl.

I used what tools I had on hand, which was this beast of a knife.

We’ve dragged this thing around for many moves! I’ll have to get my husband to tell the story behind it. :-D It turned out to be perfect for the job. Especially that little sunken in part of the blade, near the handle. It was the perfect width to set at an end of the wood, then I hammered it with a rubber mallet to split off the pieces I needed to remove

Then I used it as draw knife to debark it!

Once that was done, I made a rough sketch on the wood.

The narrower end is where I placed the handle, and I decided to leave a little bit of a “foot” for an extra touch of stability.

Before I started carving, though, I decided I should try and use my new angle grinder to level off the flat parts, take off excess wood, and maybe even shape that handle.

It came with 2 metal grinding wheels. Not wood.

I tested it anyhow, just to get to know the machine. All it really did was leave some marks in the wood. :-/ Ah, well!

Finally, it was time to use the gouge!

This thing is awesome! Oh, my goodness, it cut through the maple like nothing. I could also switch hands with it. I can use my right hand, but I am left dominant. The sloyd knife from my carving kit is for righties. I can use it with my left hand, but it takes some doing, and I still need to use my right hand to control the blade. I did use the sloyd knife a bit, to give my hands a break, since it is held in a completely different way. As I got deeper, though, it just wasn’t possible to use the sloyd knife any more.

Which is exactly why I wanted the gouge!

As I went deeper, I hit the middle heart wood, and discovered it was rotten!

This would not be an issue for the bowl part of the server, since I would be cutting it out completely, but would it affect the handle or the end?

The bowl portion is done!

Along with the gouge, I used carving knives to thin the wood at the top edges, which made it easier to set the gouge to go deeper.

You can see a spot of discoloration at the near end of the bowl. That’s the heartwood. It’s really small, so I’m hoping it won’t be an issue.

The next thing to do was remove excess wood to shape the outside.

I was going to use my coping saw for the handle part, but the darn thing keeps trying to spin on me. So I used a different hand saw, and a chisel to take off the wood under the handle. I almost took off a bit too much, though. !!

The next several hours were spent using carving blades to shape the handle and ends, and smooth out the inside. The handle and the ends were a real pain to work on!

Then it was finally time to sand.

Sanding the inside of the bowl was also a real pain! Getting the curved ends smooth was the worst of it, but sanding the inside in general was really awkward. Still, working my way through ever finer grits of sandpaper, I finally got it to where I was happy with it. It’s a good thing I wanted to keep some of the “rustic” texture in there!

Here it is, all sanded.

It was worth the fight! :-D I am quite happy with it.

Here’s a closer look at the handle end of the bowl.

Hmm… Do you see that little divot?

That’s the heartwood.

While shaping the handle, I did end up reaching the soft heartwood from underneath, so I was very careful not to expose any more of it.

Oiling the wood should help protect it. Before I did that, though, I made a last minute change.

I decided to drill a hole though the “foot” of the handle, for a hanging cord of some kind.

Finally, it was time to oil it! I use mineral oil, as it is food safe, and does not go rancid.

I love how the oil brings out the beauty of the wood, as well as protecting and preserving it!

Just a couple more detail shots. :-)

I have since threaded some twin that’s almost the same colour as the wood, though the hole.

I think I will give this to my brother. They may never use it, but I know he and his wife will appreciate it. Especially since it was made using wood from maples I had to clear away to fix the pump shack window. :-) A little piece of the farm!

The Re-Farmer

New toys, and this is un-flippin’ real!! :-D

/ Re-Farmer / 6 Comments

Okay, first the fun stuff.

I made a much delayed trip to the post office (using my face shield for the first time).

There were several packages waiting for me, including one that had these – being guarded by a Susan!

That gouge will allow me to carve much deeper than the curved blade of the sloyd knife in my carving kit. I have a couple of practice pieces in mind before I try carving a cup or small bowl, with some maple and apple wood pieces ready and waiting to try.

Besides the gouge, there is a sharpening kit for curved blades, including polishing compound. The other side of it has a matching recessed area, and the sandpaper can be affixed to it using 2 pieces of wood that slide out.

I look forward to using it to sharpen my sloyd knife!

Then there was the other thing in the mail.

The thing I had to sign for.

The return address was our vandal, so I knew I was being served… something. But what could he come up with?

When I opened it and figured out what it was, all I could do was laugh. What an abuse of the court’s time!!!

Our vandal is claiming a number of items around the property, in the amount of $13,000. I actually can’t tell if he’s asking for the stuff, or if he want’s the money. Probably the money. I’ve already sent a copy of it to my lawyer. (My Legal Shield membership, paying off again!)

Here’s the thing.

We don’t own the property or anything on it. When we moved here, my mother said we could use anything on it as if it were our own, but also made it VERY clear, that she was still the owner and called the shots. I’ve also gone out of my way to make that line of owner ship clear, even as we talk generically about “our house” our “our place”. It’s “ours” in that we live here, but we do not own any of it.

What’s on the farm, belongs to the farm, so now that the property belongs to my brother, it’s his. We have the same deal with him as we did with our mother. He knows this, because he contacted my brother to get written permission to go onto the property for “lumber” he says he paid for. Except there is no “lumber”. Unless you count the scrap and salvaged wood, all of which is damaged in some way. Lumber is one of the things listed. I have no idea what he believes is still in that barn!

On top of that, with a number of things listed, I don’t even know what he’s talking about. Others, it could be any of a number of things. It’s pretty vague. Still others are just laughable. Like the TV. He’s never claimed ownership of the TV before. I supposed it’s possible that he bought it for my late father, but if he did, it was a gift, and ownership went to my mother when my dad died.

So he’s demanding (most likely) $13,000 cash from me, for mostly junk, when I don’t even claim ownership of any of it in the first place. Besides, if I had that kind of money, we’d have a new roof by now.

There is, however, one final kicker. I have an email I sent to him, more than a year and a half ago, where I told him that if he wanted to take stuff he was claiming (some of which I already confirmed was never his), he could do so – after providing proof of ownership. He never responded. He couldn’t. He has no proof of ownership.

There is a court date, by teleconference, in February, but I’ve got 20 days to file a response.

What a flippin’ joke!

The Re-Farmer