A good morning!

As I write this, I’m having a hard time wrapping my mind around how not-late in the day it is. :-D It feels like it should be early evening. Granted, part of that might be the lighting out my window North facing window right now. It’s looking a bit dark out there, even though it’s not that cloudy. We’ve got another storm heading our way. The storm itself looks like it will pass us on the North, but we’ll likely get some rain. There’s another storm that might hit us, during the night, but I suspect that one will pass by us as well.

Anyhow.

After tending to the kitties this morning, I brought both of the windows for the old basement outside. I’m happy to say the Weldbond seems to have a marvelous job of not only adhering the window screen in place, but the metal mesh as well. I was hoping it would hold the metal. That means that all the staples I used to attach the screens, as well as the metal plates, are all now bonded to the frame!

First things first, though: tending to the outside cats.

They were oddly nervous this morning. When I headed into the sunroom, I saw why!

Look who was visiting!

In the sunroom, we have two identical bins; one for the cat kibble, and one for the bird seed. The skunks had been managing to get the cat kibble bin’s lid off, and eating the kibble. The lid had a crack near a handle, so I switched it with the other bin. The skunks have not been able to open it, since.

I guess this guy was getting pretty hungry!

Gosh, he’s so cute!

After feeding the critters, I had an extra job to include during my rounds.

While in town yesterday, I was able to pick up 10 new little flags to put on our fence posts, replacing the old ones that were torn to shreds. There wasn’t enough of a wind to be able to see all of them in this photo, but when they’re all flapping in the breeze, it looks really awesome!

With my rounds done, I headed inside for a bit, to give the cats (and guests) a chance to eat, before testing out the window.

This is the eyesore we’ve had for the last while.

You can see a nail in the wall above the wooden frame, which would have been used to hold the metal mesh frame in place. We just shoved things in to prop it a bit, and the foam insulation made sure nothing got into the basement.

What a mess.

After moving the stuff out of the window well, and pushing the insulation into the basement (there is a platform under the window for it to fall onto), I swept up the dirt a bit.

I need to prioritize getting some puck board to make a new “roof” over this. It served a definite purpose!!

Then it was time to finally check out the new window.

It fit perfectly!

The top kept tipping forward, though, so I had to hold it to take the photo.

Not only did it fit the opening as well as the plastic window, but it is even just as flush!

That is the hole for one of the latches on the plastic frame. We can just get another pair of latches, and use the same holes.

That weather stripping must have been what made the difference, because this frame is easily twice as thick as the plastic frame.

I should probably get some of that self adhesive foam weather stripping for this frame, too. Not to keep the weather out, obviously, but to keep insects from crawling around the frame.

For now, I just propped up some bricks to hold it in place. I will see about getting new latches tomorrow.

I am so happy!

Then it was time to go into the basement and take care of that foam insulation.

Here is how it looks on the inside. The platform the insulation is now lying on was built to hold a box fan, which is among those things that disappeared while the house was empty. It still comes in handy.

The breeze though that window, though! Wow!!!

Now that the screen is in, I unplugged the blower fan, to give the motor a chance to cool down. We’ll get it going again later, though, because it’s really damp down there.

Which had me checking something else out.

When we moved here, there was a dehumidifier in the corner, next to the well pump. When the girls painted the second level, they had to lug it upstairs, because it was so humid, the paint actually sloughed off the walls. So we know it works.

Sometime between when it was returned to the basement, and this spring, the water reservoir for it disappeared.

I don’t know what happened. It was there when the dehumidifier was brought downstairs. The only people besides us who have been down there has been my oldest brother, and the plumber. So what happened to the reservoir? I have no idea.

Today, I took a look at where the water would drain from and realized it was a standard male coupling, like for a hose.

We have spare drain hoses for the hot water tank; these are short hoses with a female coupling at each end.

It fit!

This is what we have now.

I’ve got the hose draining directly into the sump pump reservoir. This area is getting the most water right now, due to the condensation on the well pump and all the cold water pipes.

Since there is no reservoir in the dehumidifier, there is nothing to trigger the float to shut it off automatically. Theoretically, it will just keep on running, non-stop. We will have to check it to make sure it’s working properly, later.

Between the window screen and the dehumidifier, even with the blower off for a while, it should make a big difference in the state of the basements.

Even the new part basement.

Where I had an audience, trying to check me out!

The new part basement has its own fan, but the cement is clearly saturated. This concerns me, since it means the weeping tile is not doing the job as well as it should. After what we discovered when the septic pipes got plugged, I was afraid it would be an issue. *sigh*

Oh! The rain seems to have reaches us now. Time to shut down the computers, just in case!

Another reason we need to get that “roof” over the basement window. The breeze is really nice, but there is nothing to stop rain from getting in.

Dang. I took to long to finish this post. Looks like we lost internet! Here’s hoping we don’t lose power – and this post!

If you’re reading this, that means I managed to save it… :-D

The Re-Farmer

Window, interrupted

I am happy to say that I got the window for the old basement built – with considerably kitten interruptions!

While I did that, the girls installed the new kitchen faucet set. It turns out there are no shut off valves on the water. They had to shut off the main valve for the entire house.

On the list of things to do: add shut off valves all over. I’m pretty sure the bathroom sink doesn’t have any, and I know the toilet doesn’t. In following the pipes through the basements, the only valves we found where the ones for the outside taps, that just shut off every winter.

Also, the cold water pipes and well pump are all just dripping with condensation!

So we now have a nice, tall faucet on the sink that we can actually fit my big stock pots under. :-)

As for the window, this was my template.

As you can see, I have an enthusiastic helper!

This is the window we leave on throughout the winter, with 3 inch thick foam insulation on the inside. When it warms up, we would take it out and place a wire mesh “window” over the opening to allow air circulation to help keep the basement dry. It is much bigger than the window opening, and the wood framing the metal mesh is old and rotting. It finally broke apart last winter. Right now, we still have it leaning on the wall, but with the broken frame, critters could easily squeeze through, to the insulation is still in the window opening.

I used a piece of some of the wood I’d brought from a shed and used to make the screen door so we can leave the old basement door open. One piece was enough, even after cutting away the water damaged end.

I used the window to size the pieces, then double checked the sizing after cutting. The back of this window has self-adhesive foam weather stripping around the edges, but half of it is missing, so the pieces can’t lay flat, but it’s close enough.

Also, it’s very interesting to use a miter box with kittens trying to climb all over me and my work table! I had some trying to chew on the miter box, while others would take flying leaps at my legs, then climb up onto my shoulders.

The little beasts! :-D

The next step was to ready the right angle plates I got for this.

This was my original plan; I’d use a combination of wood glue and these plates to secure the corners. I thought to put them on the inner edges of the corners, first, but changed my mind and decided to put them on the outer edges. I marked out the screw holes so that I could drill pilot holes, later.

It…

Didn’t work.

I started by using wood glue on a corner, then putting on the plate, only to discover the screws I had were a fraction of an inch longer than the wood was thick! It was juuuuuusssssttt enough that I screwed the corner to the table a bit.

The other problem, however, was my pilot holes. They were shallow holes; I just wanted enough to make getting started, easier. A few of them ended up being ever so slightly off centre, then some of the screws started going off on angles.

The end result was that the angle plate ended up making the corners less squared!

So I took off the couple I’d put on and left it for later. I had already glued the pair of corners, which were supposed to be clamped for 10 minutes. I don’t have right angle clamps. One didn’t really need it, but I did end up using a C clamp on the other.

It was a good thing I had to wait for the glue to set for a while, because at that point, I was being thoroughly loved on and cuddled by Big Rig. Then Leyendecker joined us. Then they fell asleep on me! After a while, Big Rig took off, but Leyendecker stayed. I finally had to move, and discovered David settled in one of their box caves, so I put them together – and Leyendecker stayed!

Until my husband came down, and he ended up with kittens nursing behind his butt. :-D Finally, Beep Beep got tired of that – and she joined David!

David is such a sweetie will all the cats and kittens!

I was, eventually, able to continue with the window. :-D

One of the things I found among the many, many things shoved onto the support beam, between the floor joists above, was a roll of window screen. I dug it out and, after gluing the remaining two corners of the frame, used it to measure off a piece of screen.

I actually ended up throwing away the first piece I’d cut, as it turned out to be damaged.

I don’t know how long that roll had been sitting there, but it was just caked with dust!!! Enough to make unrolling it very… sticky. :-/ I cut the mesh larger than the frame, so that I could fold the edges in, for extra strength.

I also cut some of the wire mesh to size.

After fighting with the window screen for a while, trying to get the edges folded under, it occurred to me that I was working on the “pretty” side of the window frame, and that the screen and wire mesh needed to be on the “ugly” side, that would be facing inside the basement.

No, the wood glue wasn’t dry enough to hold, yet. Which was fine. After I flipped it, I just stuck it back together and kept going.

It took away longer to get those edges to fold under than I expected! Here, I’ve tacked the screen to the frame at the corners with a staple gun.

Once it was tacked in place, I got out some Weldbond adhesive and applied it to the edges, then used a cast off piece of wood to spread the adhesive and push it through the screen.

Then I added the wire mesh.

I was going to say I went overboard with the staple gun, but to be honest, I seriously considered adding even more. Every wire around the edge has a staple, alternating between the outside edge, and the next wire in.

The corners each got at least 4 staples. :-D

I’m hoping that, between the Weldbond and the staples, no critter is going to be able to force their way through.

I wasn’t gone yet, though!

Remember those plates?

It took some hunting, but I did find some shorter wood screws to use. The plates were positioned based on the wood based on where the wire was. As long as the point lined up with the corner joins, I just needed to not have a wire in the way of the screws.

Between the plates and the wire screen, this frame is not moving!

Next, I needed to add handles. I used cast off pieces of wood under the metal plates, to keep the adhesive off the worktable. I’d already accidentally screwed it to the table. I didn’t want to glue it, too! :-D

The weather stripping on the back of the window wouldn’t let it lie flat, but I could at least line up the edges. I then marked the sides of the new window frame at the latches, and at the knobs.

I then added the handles with the bottoms lined up with where I’d marked the placement of the knobs.

The latches on the window fit into holes in the window opening outside. Once in place, the window is flush with the wall around the window opening. The wood is much thicker than the plastic, so I know at the very least, it will stick out from the wall. What we might end up doing is adding another pair of latches, so the outside of that window opening will have the fittings for both windows on them.

We’ll make that decision later, though. It will all depend on how it fits.

For now, the window is finished. I’ll leave the adhesive to dry overnight, and tomorrow, I’ll see if I got it right and it fits – or if I screwed up! :-D

Once I know how it fits, we will be able to see what would work best for fastening it in place.

After that, the only thing left will be to paint it. We have several things that will need painting, so we’ll wait until later in the season and do all of them at the same time.

Happily, we are now able to cross a couple more things off the to-do list. The list isn’t going down as fast as I’d like, but it is going down! :-)

The Re-Farmer

A bit of relief, and catching up

First up, kittens!

Well. A couple of them. :-D

Going down to tend to the kittens in the morning has become a two person job. The kittens are on the top step when the door is open, so we’ve got one person at the door, trying to pick up kittens so we can use the step, while the other holds a laundry basket to carry them in, and to catch the ones that slip past.

The kittens love that laundry basket! After they get a ride down the stairs, they stay and play in and around it.

Beep Beep loves that thing, too!

Temperatures have been cooling down a bit, lately. The overnight temperatures meant actually being able to sleep at night! We’ve to thunderstorms predicted for today and tomorrow, then we’re supposed to stay in the mid-20’s (77-80F) for the remainder of the long range forecast.

It really says something that “mid 20’s” are now “cooler” temperatures. Even during last year’s drought, those where our hot days. We did break 30 every now and then, but nothing like what we’ve had this year.

It does make the morning rounds outside much more pleasant.

Except for all the mosquitoes and horseflies. The horseflies usually ignore me, but I got bit this morning.

You know why they’re called horseflies?

Because getting bit by one is like being kicked by a horse, compared to mosquitoes!

It took a couple of hours, but the pain and swelling did go down. Now I just have a weird white spot at the bite, surrounded by red, and a bit of residual swelling.

After doing my morning rounds, I headed into town for a few things. One of my stops was at the pharmacy, to see if my husband’s one missing prescription got updated. Still nothing, but they did have the remains of a prescription for 3 days worth of pills on file, so I took that. These are my husband’s main pain killers. It’s not just the increased pain that’s a problem, but it basically has him going cold turkey off of a very powerful drug, and it’s doing all sorts of crazy things to his body.

With the lack of response from the clinic, I might just drive there on Monday.

Another stop in town was at the grocery store, with our water jugs for refilling. There was a line up outside, which gave me time to notice and get pictures of these guys.

Such gorgeous moths! Just hanging out on the wall, along with all the fishflies. :-D

While I was in town, the girls got everything ready for a trip to the dump, so I could unload, reload and take off right away. We’ve been needing a dump run for a while! Normally, when I get there, I unload into the bins by the caretaker’s shed (which then get hauled to the city). This time, I decided to go into the pit. As I checked in with the caretaker and mentioned I was going into the pit this time, he told me they’ve been having problems with bears lately!

The last time I went into the pit, it actually was a pit. Now, it’s so full, there’s just enough space for vehicles to back into it, and add things to the pile. !! I really don’t like going into there, mostly because I’m paranoid about my tires. I don’t want to be driving over nails or broken glass or anything like that. :-(

After unloading the garbage, I went back to the bins to unload the recycling and electronics garbage. I was just getting ready to head out, when I saw a truck pull in, hauling something.

Something large, round and made of steel.

The driver stopped to talk to the caretaker, so I just had to snap a picture, as I was leaving!

Yup! A bear trap!

In our area, we have typically only have black bears. They tend to prefer to stay away from people, but what bear won’t take advantage of free food – and defend it? Much better for the bear, to catch it and release it well away from the dump.

Once home, I had hoped to start on some work outside. Maybe get some mowing done. It started to rain a bit on the ride home, and now I can see dark storm clouds in the distance, through the security camera.

I guess that means it’s a good time to join the kitties in the basement, and finally build that window for the old basement. :-)

The Re-Farmer

What a surprise!

This time of year, we pretty much never see deer at the feeding station. If they’re coming by, it’s typically when we’re all in bed.

Except tonight.

My daughter happened to be in the living room, with the lights out, escaping the heat of the second floor when she glanced out the window to see this.

The other surprise is actually getting a half decent photo. We didn’t even try to use the DSLR; moving to adjust the settings for a night shot would have spooked the deer away, so this is just using auto on my phone’s camera!

You’ll notice the antlers look very thick and fuzzy. That’s because they are! I have actually never seen a buck with the velvet still on his antlers like this, before! (not counting photographs, of course)

I’m glad he was able to enjoy the seeds I’m still putting on the ground for the birds. Right now, I’m just using black oilseeds – a type of sunflower seed. The grass covers most of the seed on the ground. Not just grass, though. With the rain we’ve been having, there are quite a few sprouted sunflowers in the area, and I can see quite a few other things growing from the mixed bird seed I’d used before. I’m pretty sure a lot of the grass in that area is actually oat grass, too. The birds can get through it to reach the seeds well enough, but it would take more effort for a deer!

Of course, the deer can graze on the seedlings, too, and I’m much rather he eats the sunflower seedlings here, than the ones we deliberately planted in the garden! :-D

What a majestic animal! I’m so happy he came by!

The Re-Farmer

A little bit of progress

Yesterday, things cooled down enough it was actually worth opening up my window.

There is still a problem with that.

The three amigos and their stuffed companion!

For some reason, the cats really, really like to attack the bugs through this window screen. I try to keep on top of it, but they’ve managed to cause some minor damage already, and I’m often forced to close the window to keep them from clawing their way through the screen!

With the window closed, they prefer the spaces I’ve left for them on my utility shelf. As crack-eyed Two-Face is demonstrating! :-D

The cool of the evening was a welcome respite.

It didn’t last long, unfortunately.

By about 5pm, we reached our high of 32C/89F, with the humidex at 38C/100F. The low of 21C/70F we’re supposed to reach tonight is going to welcome, along with any rain we might get.

We have yet to try and move the counter today. I’m hoping to try this evening, but I don’t have high hopes for that.

This afternoon, I headed into town and made another deposit to the garage, against the work on my mother’s car. Sometime in the next couple of weeks, he’ll order the part and shoot to have it done at the end of July, when I can pay off the balance. I am really appreciating how patient he’s been about my mother’s car!

The down side it, almost our discretionary funds in our budget has been doing to get my mother’s car fixed, rather than towards things like what we’ll need to buy to build the cordwood outhouse, or the plywood to make a base on the trailer frame, or a cover for the old basement window to replace the one that fell off, or… the list goes on. Between that and the heat making it downright dangerous to work outside, I already feel like spring was almost completely wasted, and summer doesn’t look like it’ll be much better. :-(

Still, we do what we can, and try not to stress about what we can’t.

Once I was done at the garage, I went to the pharmacy to pick up prescription refills. We’d called them in yesterday, but one of my husband’s meds that was renewed last month, was only renewed for 30 days. They had sent a fax to the doctor’s office, but there had been no reply yet. So they filled my husband’s bubble packs without it, and when I talked to them today, the pharmacist said he would send the fax again.

Along with mine. It turns out mine was renewed for a short time, too, and there was only 15 days worth, left. I decided to wait on those. Hopefully, I’ll be able to pick up both at the same time, in a few days. Unfortunately, the missing medication for my husband is one of his pain killers. That is NOT going to go well for him. His pain is barely controlled as it is. Being down one of his painkillers is going to make life decidedly more unpleasant for him. :-(

My next stop was at the hardware store, where I wanted to look at different types of fasteners to use on the wire screen door I made for the basement. I ended up going with the old standby: hook and eye closures. I also found some angle plates that will solve a problem for me, in making a new screen window for the old part basement to replace the one that finally broke apart over the winter. On that, I plan to use both the 1 inch wire that I used on the door, to keep the critters out, and window screen mesh (I found rolls of it when cleaning out the basement!) to keep the bugs out. The air circulation from outside is needed to help keep the old basement dry, together with the blower fan. With the materials I have, I knew I’d have a problem making strong corners on the frame, and these right-angle plates are just what I need to solve that problem!

Once I got home, I put the hook and eye closures on the screen in the door. There are now 4 of them, and there is no way the cats will be able to push their way through anymore!

We had talked about possibly removing the basement door, but decided against it. When it is fully open, it blocks my bedroom door. So I’ll just leave my own door open, and the basement door will provide me with privacy. :-D

With the heat, just putting on those hook and eye closures was enough to leave me dripping. I’d hate to think how much hotter it would be if we didn’t have that door open! It’s like poor man’s geothermal. :-D

One of the other things I did while in town was swing by the grocery store to get more things that don’t need to be cooked. It’s been too hot to eat; none of us have appetites, and no one has the energy to cook. So fruits, vegetables, and sandwiches are the order of the day! I have been telling myself to go eat something since before I started writing this post, because I’m absolutely famished, but I have zero appetite. It’s the sort of thing where we have to make ourselves eat, just so we don’t end up getting dizzy spells or something. We have no problem making sure to stay hydrated, though, that’s for sure.

*sigh*

Well, I guess I should go make myself a food of some kind.

The Re-Farmer

Better than I expected

Today, I finally got the riding mower in to the shop for some TLC. We finally got to use the new ramps my brother bought me. <3 The girls and I had to take the middle seats out of the van (one of the first things we did after buying the van was take out the bench seat in the back; we never put it back and left it behind when we moved) to fit it, but we got it in, with room to spare.

It was rather funny when I got to the shop. After talking to the lady at the counter and getting the work order form filled in, I asked about getting it unloaded out of my van.

She did a double take and looked at me. “It’s in your van?” Yes. I can fit a lot in that thing!

She got someone to come out to unload it with me. As we were walking out, he asked me where it was, and I told him it was in the van. My van was the only one in the parking lot at the time.

He did a double take.

“You got it in a van??”

:-D

Yes. Yes, we did!

So that is now delivered, and I will get a call with an estimate before they work on it. I made sure to mention the drive chain had come off, and that I didn’t bother putting it back on, since I can’t reach under to tighten what needs tightening. I also mentioned the tire I think may need replacing, as well as mentioning that it’s had a hard two years, so if they see anything else, let me know!

Thankfully, we have the new push mower, so there is no rush to get it done.

Once that was done, I called up my mother to see if she was home for the next while. My timing was perfect, as she did have something booked later. The building she lives is has started to hold social events again, organized by a social worker. I had just enough time to pop over. I told her I had something for her; a mushroom!

“Oh! I hope it’s okay,” she says.

It took me a moment to realize she thought I meant mushrooms I’d picked at the farm. :-D I cleared that up with her!

Now, I wasn’t sure how she would respond to the spoon. My mother is not exactly gracious with gifts. In fact, she is often very cruel, and I would not have been surprised if she refused it. As it was, when she finally saw it, she immediately started talking about what kind of mushroom it was that she wanted me to carve for her, and doodled it on the back of an envelope. I explained to her (again) that I got a spoon blank in my carving kit, and when she asked for a mushroom, I decided to include on in the spoon, and a morel was basically what fit. I would need wood in a different size and shape to carve what she wanted – and now I have her sketch to go by. She just laughed and said there was no hurry.

I had to ask specifically if she wanted to keep the spoon or not, since she had dismissed it immediately to do the sketch. I told her it was my first carving, and that I was offering it to her, if she wanted it. She said she would keep it.

Getting that straight was a bit like pulling teeth! I think she might actually like it, but I’m not sure.

Then she asked me if she’d ever shown me her Russian spoon. No, she hadn’t! So she brought it out for me to see.

While the spoon is from Russia, she got it from her late aunt, who was born in Canada. My mother said that it was spoons like this that they used for eating, when she grew up in Poland. (What a large size for an eating spoon!) She mentioned that the spoons they used were painted, too, and commented on how they must have been eating the paint, as it came off over time. Who knows what was used to make the paint; it’s unlikely to have been something commercially prepared, in that region and time period. Home made or purchased, any paint still could have been potentially toxic!

I’m really glad she showed it to me.

Once at home, I decided to spend some time in the basement to work on a hair pin my daughter requested. I’ll post about that separately. Before I do, though, I just had to share my company!

Of course, as soon as I sat down at the work table, I had kittens all over me. They did eventually move on, except Big Rig.

Who decided to give my arm kisses.

My goodness, she looks like Susan (who would be her big sister!).

Then she heard a kerfuffle and ran off to join her siblings.

Beep Beep is so patient! :-D

Later, I looked up from my work and found this face, staring at me.

Nicco looks ready for a nap! :-D

The lilac wood she has a paw on is the branch from which I’d cut off a piece for the hair pin.

Unfortunately, at the point I was at when I took that picture, I was needing to use the Dremel, and the noise chased her away.

I was actually able to start and finish the project, even with the kittens crawling all over me, so that worked out much better than expected!

I’ll have photos of the finished hair pin in my next post.

The Re-Farmer

Growing things, wins and losses

Oy, what a day it’s been!

Our high of the day was reached at about 4:30 pm! 32C/89F, with the humidex putting us at 36C/97F. We’re not going to be cooling down much, even overnight, either.

At least there’s a wind, and on the weather radar, it looks like we’ll at least get some rain this evening, if not the thunderstorms. Those look like they’ll go right past us.

It was, at least, much more bearable when I did my rounds this morning. That, and the basement is nice and cool for the kittens.

Since they have gotten so good and escaping as soon as the door is opened and my hands are full, I’ve sacrificed one of my slightly taller laundry baskets for kitten jail.

I succeeded only in catching David! :-D He loves that thing!

I ended up just leaving the door open and let them be, until after I was done outside. By then, a daughter was available to help herd them back downstairs.

I am happy to say that some of the replacement sunflower seeds we planted are starting to sprout! They are just starting to break ground. The ones from the first planting have, for the most part, been growing quite well.

Something has been digging into the softer soil where we planted the seeds. Whatever it doing it, isn’t after the seeds themselves. This time, at least, the seedling didn’t get dug up in the process. My guess is, skunks are after grubs or worms.

We did, however, have a couple more losses of the original seedlings.

Something just up and ate a couple of them! Most likely deer. *sigh* The deer aren’t coming around much anymore; there is one that I’ve been seeing at the gate on the trail cams, but that’s it.

So far, at least, nothing has been eating the squash plants, and it doesn’t look like we’ve lost more beet greens.

The small mock orange by the side door of the house is going to be blooming very well this year! It got a major pruning, the summer before we moved out here, so that the walls could be painted, but it has recovered very well. The other one by the clothes line platform had a rough time last year, but it does have some flowers – all along the bottom! Most of it, however, has no buds at all.

These guys are finally starting to open. I expect to see many more, within the next few days!

This little shrub along the south side of the driveway has lots of berries on it. I have no idea what they are. There are quite a few of them around, but only this one has berries. I’m thinking location has much to do with it. It’s the only one that gets a lot of sun all day. The others are shaded by trees or sheds.

If anyone knows what this is, please feel free to let me know in the comments.

For now, I’ll just assume that whatever it is, is poisonous, and just appreciate it for its beauty. :-)

The Re-Farmer

Heat Wave

Today was our day to go into the city to do our big shopping trip.

We didn’t finish.

We currently have more weather warnings. This time for heat!

I took the above screenshot shortly before 4:30pm. We might actually go a bit higher before it starts cooling down. 30C/86F is hot enough, but check out the humidex expected for Monday! 40C = 104F

We’ve been getting enough rain lately that our municipality has removed the burn ban, completely. No restrictions at all right now! We have lots that needs to be burned, but with the heat, who wants to be around fire right now? :-D

And we don’t have air conditioning in the van anymore, nor even working fans in the console.

It did make the trip into the city … interesting!

We managed to get to the Walmart and the Costco to stock up. After gassing up at the Costco, we were going to go to a couple more places. Then road construction and detours had us doing a route march through residential areas (why are they designed to be such mazes???) before we could back track, go back through the construction, and finally take a road that would get us to the street we needed, albeit at a different spot than I was originally after. By that time, I was done. We just went home.

Part of the reason I was okay with doing that is because my daughter asked for an extra trip into the city, which we’ll be doing tomorrow. She’s buying us a new stove! Since we’ll be in the city again anyhow, we can also pick up the rest of the stuff we need for the month.

Considering she is using her savings and had to quit her job, I am extremely grateful that she is willing to do this for us. The stove we have has only three working elements right now – we stopped using the 4th when we saw sparks every time we turned it on – and even those don’t heat up well, among other issues.

There isn’t much in the monthly shop we need to get, though. The freezer and pantry are stocked up again. We also have lots of cat food and litter – we’d run out of both, completely, as of this morning! The only things left are the items we don’t want to get in bulk quantities, like fresh fruits and vegetables, or ingredients we can only find in various ethnic sections of a grocery franchise we regularly visit now.

With the current heat wave, getting work done outside is going to be difficult. Unless I start getting up at 5am, while it’s still cooler (well; not so much over the next few days). I might just have to start going that. Which means, no more staying up until 2am!

It would mean kicking cats off my bed, too. :-D

Oh, to have the life of our cats! <3

The Re-Farmer

First, the fun stuff

Forecasts for today were for a high of 29C/84F, with the humidex at 33C/91F, with afternoon thunderstorms. So I wasn’t expecting to accomplish much outside.

In the end, I wouldn’t have been able to, anyhow. Pain levels are pretty high today. As long as I’m just walking on level ground, I’m okay – I’m just limping and hobbling like a decrepit old lady ;-) – but any sort of step sends shooting pains in my right knee.

I’ve been using my husband’s bath chair more than he has, lately! :-D

I was still able to do my rounds, as usual, though.

Rolando Moon has been hanging out in this tree, and on the roof, lately! She is so deceptively adorable. :-D

She even joined me when I was switching out the trail cam memory cards.

We have some new flowers I wasn’t expecting yet, this morning.

My mother has had a small flower garden along the East side of the house for as long as I can remember. This iris is near where we now keep the bird feeder. They and some lilies were completely crowded out by other greenery (I’m not sure they those were planted deliberately or not) and chickweed, but I managed to weed them out at least a bit. There were no signs of buds anywhere, then suddenly, this morning, there were two flowers!

Still no signs of other buds, though!

In checking the garden plots, it seems to me that something might be eating our beet greens in one of the plots. I’d thought at first that the cats were digging in the garden again, and that’s why it looked like there were fewer beets, but as I weeded, I noticed bare stems. It might be deer, but while I have been seeing deer at the gate in the trail cams, they don’t look like they came from the yard at all, but more like they’d come from the direction of the barn. Plus, I would expect deer to do more than nibble a few leaves here and there. I suppose hares are another possibility, but with the presence of yard cats, I don’t think we actually get them in the yard. So I’m not sure what’s going on there.

With no plans to work outside, I made a trip into town. I wanted to pick up a Dremel tip so I could finish my spoon, as well as pick up another litter pan for the basement. The kittens are getting bigger, and one pan isn’t enough for them anymore! The kittens were thrilled, which is pretty funny. Who knew litter pans could be so much fun for kittens?

I’ll post about how the carving went, separately. While I was working, however, I did have company!

Two Face and David joined the kittens, too. Between playing with them, and crawling all over me, the kittens got tired right out! :-D

When I was done and started up the stairs, I found someone looking at me!

David found one of the kittens’ favorite spots!

Then he “pounced”. :-D

What a funny boy!

While uploading photos to write this post, we lost our internet as a thunderstorm rolled by. From the looks of the weather radar, there is a very long, narrow storm system heading our way, so I think I’d better get to my other post, then shut the computer down, while I have time! :-D

Uh oh. Looks like we lost internet again… oh, it’s back. For now.

It’s going to be an interesting evening!

The Re-Farmer

Catch up, and kitties!

I’m happy to say that, yesterday evening, when things started to cool down a bit, we got a couple of big jobs finished.

The first was to finish cleaning up the pile of branches pruned from the apple trees.

My awesome daughters actually finished the job by cutting up the largest pieces. Except that one big stump piece. We’re not going to bother with that.

It’s going to take a while to burn this away, but at least it’s neatly stacked, and I can mow around it.

Speaking of which, that was the other big job I finally got done. I finally got into the west end of the old garden area, and into the maple grove. The new mower is just awesome, getting in between the trees. I turned on the “health” app that my phone came with, for the pedometer, and according to that thing, I walked about 7 km (4.34 miles), just mowing in the trees.

I’m glad that got done last night, because when I did my rounds this morning, it was already 24C/75F, and the dew wasn’t even dry yet!

These flowers will soon be a riot of purple, all along the south fence by the spruce grove. :-)

Since manual labour outside was not going to happen yet, I decided to spend some time working with the basement.

The kittens had already escaped when I first came down to tend to them in the morning, and I couldn’t get them all back. My husband was sweet enough to supervise them while I did the outside part of my rounds (more to make sure the adult cats didn’t hurt any of them), then helped me get them back into the basement, so I could give them some wet cat food.

When I tried to go back down later, I opened the door and found 4 kitten heads at the top step – the door just clears them when it opens! – and that was it. They were gone. All five of them ended up upstairs, running around.

I let them be. They’d done all right earlier – only Fenrir is a concern for aggressiveness – and I decided to take advantage of them being out of the basement. I brought down a long corded power bar, and some large cup hooks (among other things). I attached the cup hooks into one of the floor joists running across the ceiling of the basement. Two of them are now holding the cord for the power bar, with the plug ins hanging down. It even has USB ports, if I need to charge my phone. Three other hooks are now there to hold whatever else is needed.

With the kittens away, I used my wood burning tool, with the knife blade attachment, to cut a couple of 5 gallon water jugs in half, then cut the necks off the top. The halves are now available to use as covers for plants, if needed, and the necks I left as cat toys. ;-)

I was then able to let the tool hang from one of the hooks to cool down, completely safe from kitties, until I could take off the knife blade and put it away in its case.

Then my daughter helped me bring the babies back down again.

Once that was done, I started working on my carving practice. I had kittens crawling all over me until they got bored and left me alone.

How adorable is that!!!

Beep Beep had been persuaded to come down, too, and she decided to join her babies.

That lasted until I started using my Dremel tools and scared them all away. :-(

After I was done with the noisy tools, and continued to work on the spoon, I started hearing a very tiny, very wet, slurping noise.

Yeah. That’s Leyendecker, nursing!

What a silly kitty! Even Beep Beep is looking at him funny. :-D

I am quite happy with how the spoon progressed today, but I’ll post about that later.

We’ve finally reached the high of the day for today (27C/80F), so things should start cooling down now. I’m hoping that, after supper, it’ll be cool enough to get stuff done outside. The next couple of days are supposed to be even hotter, with thunderstorms expected tomorrow, so anything I can get done tonight is bonus.

The Re-Farmer