With the chillier temperatures, it’s really not a good time to be painting outdoors, so I made a point of starting right after doing my morning rounds. This way, it could have the whole day to cure, and I could decide on whether I wanted to do a second coat or not.
The top is cut so terribly crooked! LOL This is the piece I cut using a hand saw, after two failed attempts with the power tools we have available.
Though the house was painted the summer before we moved in, it looks like the inside of the door frame only got one coat, so I went ahead and painted that, too.
The extension cord to the cat shelter was staying, but I managed to keep it away from the paint. This corner on the left is where we’ve had to add the most material to make up for the shifting of the frame.
It’s really amazing how much a coat of paint makes even the worst patch jobs look better! :-D
Well, that didn’t take long! :-D
I had to leave the doors into the sun room open, of course, and later in the day we found white foot prints on the concrete inside! :-D
I’m rather happy with how the paint was feeling by the end of the day. We will be able to drop the cord down and actually close the door for the night. I’ve decided to go ahead and give it a second coat tomorrow morning, which means that the day after tomorrow, we can hang the door back up again.
It will be so good to finally have this job done!!!
After painting this morning, I headed to the post office to pick up our bulbs, which are now planted – but those will get their own posts! :-)
The first order of business was to test out my new tool on the sun room door frame.
I had gone into town to look at mini planers, but while perusing my options, I chose this tool, instead.
It’s a shaver. The shaving plate looks rather like a bada$$ Parmesan cheese grater. I figured the many cutting blades would make short work of the areas I needed to work on.
I was right. (For a change! LOL)
Using the blue paint marks from the door to show me exactly where I needed to shave off the wood – was well as smoothing my messy, messy cut somewhat – I did both the side of the door frame and the threshold.
What a fantastic little tool! The door can now close without catching anywhere on the frame or the threshold!
Then, because it worked so well, I did the threshold for the inner door, too. It now closes better, too.
The door is not quite done, yet. I’ve decided I need to take it off again, and move the hinges in about half an inch. Right now, when the door is closed, there is a lot of stress at the hinges, and I can actually see where parts of the door are starting to pull apart. This is a temporary fix with a salvaged door, but I’d like it to at least last the winter!
When we first set up the replacement door and attached it to the frame, we lined the hinges up on the door itself with the old door, then rehung it in the same recesses in the frame that the old door’s hinges were in.
With all the other problems that had to be dealt with, we still used the same spots, even after I filled the recesses with wood. Now that the door can actually close, I can see that the hinges are too far out, which basically forces the door to bend in order to close.
As I was thinking about this, and remembering the old door we were replacing, I am realizing what likely happened. When the sun room was built (which happened while we were living in another province), it likely had a different door. When that door was replaced with the door that was here when we moved in, the same recesses in the frame were used for the hinges. Remembering the problems we had to close that door before it finally fell apart, I am guessing that the house had already shifted and the frame was no longer straight, plus the door itself didn’t set the same way as the previous door, but whomever hung it didn’t bother doing anything to compensate for that. Over the years, my parents just put up with it. Meanwhile, the house would have continued to shift which would have made it worse, until it was in the condition it was in when we moved here.
If my guess is right, we hung this door up in the same location as the previous door, which was hung in the same location as the original door.
What I am now thinking of doing is taking the door off again, painting the frame, then hanging it back up with the hinges further in, rather than where the old door was hung.
Given the overnight temperatures, though, I will need to wait for a sunny, warmer day so the paint will have as much time to cure as possible before it starts dropping below freezing. Unfortunately, the long range forecasts are showing a steep drop in temperatures over the next few days, though it is supposed to flatten off after that.
For now, though, we have a working door!
The next job on the list was setting up the newly painted bird feeder stand.
I decided to set it like a fence post, in the same spot as before. The new metal support we have the suet cage hanging from was set aside, and self-seeded flowers and bird seed plants cleared away. Much of it was already empty, though. I don’t know what cats were fighting in there, but they flattened everything around the bases of the bird bath and feeder!
I half considered trying out one of the old post hole diggers we found, but as I dug, I immediately started hitting rocks, so I’m glad I didn’t! The soil is a lot deeper here than in other areas; I just started to hit sandy soil when I stopped. Very different from the soil further away from the house.
The larger rocks I dug out went back in, to help support the post.
Finally, the soil was returned and stamped down. It will now be left for a few days to settle before I hang anything on the hook.
If you look closely at the suet feeder in the back, you can see a chickadee on it!
Chickadees were not my only audience!
The suet feeder was returned, with the hook facing the bird bath. I deliberately placed the other hook facing away from the bird bath, to reduce the number of seeds that end up in it. That’s not as much of a concern with a suet feeder, though my daughter pointed out that it’s a lot closer to something the cats use to drink out of! So it will likely be moved further away.
The chickadees were quick to return, and are already using the support bars from under the platform feeder as perches! This might actually be a better use for them than to add another platform later.
The hook is on the north side of the post, but the post itself is leaning slightly to the south. This was not intentional, but rather than straightening it, I decided to leave it. It should compensate a bit for any pull from the weight of a full bird feeder. That would be more of an issue with those surprisingly fierce winds from the south that kept blowing the whole thing over until we stopped hanging a feeder on it.
I’m rather pleased with how it looks. Plus, it’s set deep enough in the ground that I should be able to hang a feeder on it without needing to stand on something. Previously, I could tip the whole thing over to reach but, obviously, that is no longer an option!
The real test will be how it holds up the next time we have a storm, while a feeder is hanging off of it!
The replacement door to the sun room is back up again!
Of course, things went wonky in the process. At this point, I expect nothing else!
I don’t know if you can tell, but we ended up adding yet another piece of wood under the bottom hinge. The gap there was still massive. And yet, none was needed at the middle hinge!
Of course, the door didn’t quite fit, even after all this. We still needed to force the door over the threshold. We’d had to do that with the old door, to a certain extent. It wasn’t as noticeable, and I think that was partly because the door was already starting to fall apart before we moved here.
Using the blue paint scraped off the door as a guide, I used whatever tools I could dig up to smooth out the side piece. I tried one of the planes we found in the basement. It was a bit big for the space, but it would have worked, except the plate was loose, which is when I discovered the frame holding it was cracked.
We didn’t find it that way. The cats had knocked it off the shelf I’d put it on.
*sigh*
I carved out a recess for the latch plate and deepened the hole for the latch itself until it could finally catch and stay caught. I also began chiselling, carving and rasping away at the outer edge of the threshold until the door could close without being forced.
Well. It still kinda needs to be forced. There is still an issue with the hinges. Understandably, there is a lot of stress on them. I’m trying to think of what I can do to fix that, and not a whole lot comes to mind that is feasible.
I suspect this door won’t last very long, but it’s the best we can do right now, and at least there’s a working door!
I still need to work on smoothing out the frame some more before we paint it. I have been eyeballing some tiny little planers at the hardware store that would be perfect for the job. I might just have to spring for one.
You know, when the outer door on the sun room finally broke, we thought replacing it would just be a simple matter of switching out one door for another that we salvaged from a shed.
How wrong we were!
There were a lot of things we discovered along the way that complicated things. For those who are new to this blog (welcome! Happy to see you here! :-) ), you can catch up on the saga here, here, here and here. Then life happened, and the whole thing stopped until yesterday.
Today, I am finally seeing a light at the end of the tunnel!
The first thing I did was smooth out the rough bits of the cut pieces a bit, then nail the side piece in place. I didn’t bother taking a picture at that point, because it really just looked the same as when we checked the final fit yesterday.
I had trimmed away some ragged bits of old caulking that were still attached to both frame and wall, but that bit of a gap that you can see was still there.
Once the side piece was nailed in, it was time to take off the door and work on the hinge side.
When cutting the side piece yesterday, I first cut it to the line I’d measured and marked with a chalk line, only to discover that when we put the piece in place, needed more cut off. That I was left with two long, narrow pieces came in very handy.
I used sections from the skinny end of the first piece I cut off to fill in the hinge recesses.
Since the weight of the door will be on this side, I used some wood glue on the second piece that was cut off…
… then nailed it in place, with extra nails on either side of where the hinges will be screwed into place.
Before taking the door off its hinges, I’d marked exactly where I would need to put the latch plate on the other side.
While giving the glue some time to set, I used a chisel to start gouging out a recess for the latch.
While I had been working on this, we got a call from the appliance repair guy about our washing machine, and he arrived while I was gouging, so I paused to be with him for that.
It was just last week that our new washing machine simply stopped working. No response when pushing the power button. Of course, pretty much every time we walked past it, we’d reach over and push the button. Nothing happened.
When the repair guy first called after being contacted by LG for the warranty work, and I described what was (and was not) happening, he ordered 2 parts that could possibly be the problem. They came in very quickly – in conversation, he mentioned that some of his customers using other brands have been waiting for 5-6 weeks, and he still doesn’t have their parts! With LG, the parts come in pretty much the next day.
He, of course, did the same thing we did; pushed the power button. LOL He tested the power to the outlet, and it was fine. As we were chatting, he mentioned that he has only recently started working with LG products; the company had been trying to get him to do warranty work for them for some time, and he finally agreed. I’m glad he did, because he’s the only person in the area that does! Still, he said he’s not as familiar with LG products as other brands.
After popping off the cover for the electronics at the back, he took the screws off one of the first part he was going to replace, for the power. The other one would have been the display panel. Then to check something out, he plugged it in.
It made noise.
I think we both had matching stunned faces.
He hit the power button.
It turned on.
I asked him what he did. He’d done nothing!
He checked the wires, to see if any where loose, but everything was fine.
He was at a complete loss as to why is suddenly started working.
He was also at a loss as to how to proceed. If he left it and sent the parts back, he’d half to re-order them if it stopped working again. The fact that it stopped working once, for no reason he could find, means that it could easily happen again. In the end, he decided to leave the parts with me, bill the warranty work, then if – when? – it happened again, we could call him directly, and he’d put in the new parts. Not knowing why it happened in the first place, as well as what happened for it to start working again, made is difficult for him to just walk away from the job. It just seems like there’s a very good chance it will happen again.
After he left, we started a small load of laundry, just to test it! So far, it’s still working fine.
What a mystery!
Ah, technology. I love my tech, but it does break down a lot more than the old school stuff! :-D
After that, I went back to working on the door.
While the door was hung, I had to lift it over the threshold to be able to close it. There was a large gap at the bottom hinge, but not the top hinge. In fact, the top corner of the door was hitting the frame. So while I did not need to add material all the way to the top of the frame, I decided to fill the hinge recess at the top, as well. With no hinge recesses, there should be enough of a gap at the top for the door to no longer be touching the frame at that corner.
Once the hinge side was built up, I put the top piece back. I then applied caulk to the outside of the frame pieces.
It’s amazing how just adding that white caulk over the gap made the whole thing look so much better!
The top was a different issue. Particularly in the middle, where there was a substantial section of wood missing! I’m guessing there was some rot that got cleaned out, before it was painted the summer before we moved in.
Little bits and pieces from the remaining piece cut off the side frame got used to fill in the gap, then I caulked the rest.
I lined the angle cut with the other side of the frame, but the shifting meant that left a large gap on the hinge side. Another piece of wood and some wood glue got pressed into duty to fill the space.
For now, everything is being left for the glue to and caulk to dry and cure for a while. The next step will be to hang the door again, and attach the latch plate. I picked up a quart of white exterior paint, and the whole frame will be painted.
Then, once everything is back up, the chain for the door, to keep it from blowing open too far, will be attached to the top of the frame. Once that is secure, I plan to move the shelf we’ve got behind the door, to the other side. I want to wait until the door is completely done because, right now, that shelf ensures the door doesn’t get blown open and breaking a window or something. I doubt the door can even open that far, but I didn’t want to take any chances!
So I figure, I’ll snag a daughter this evening to help hang the door, then – weather willing – the painting can happen tomorrow afternoon/evening.
Unless we discover something else has gone wrong, once the door is hung back up. The way this project has been going, that wouldn’t surprise me at all! :-D
This morning, after doing my rounds and feeding the felines, I headed into town to run a few errands. This included stopping at the post office in our little hamlet. Which is also a liquor store.
I bought a whole lot of wine.
Or, should I say, my daughter did, since she paid for it. :-D
We don’t actually want the wine, but it came in 3L jugs. We need to rack our hard apple cider, and I’ve been hesitating because we only have gallon jugs (4L) to rack into. With using unfiltered, raw apple juice, there is going to be a LOT left behind when we siphon off the liquid, and 4L jugs would have left a lot more headroom than there should be.
The 3L wine bottles will be perfect carboys.
We will just have to drink a lot of wine over the next couple of days! :-D
I hope it’s actually good wine. I’m not a wine drinker to begin with, so chances are pretty high I won’t like it. :-D
I was happy to see the waterproof cord protectors came in in the mail, so that’s another step closer to winterizing the cat house.
Once in town, I made a point of stopping at a local business that had been getting threats, including death threats, for putting up a humorous sign saying “face diapers” were not required to enter. I’d talked to one of the owners online, and wanted to stop in in person to show them some support. We had an excellent chat. It turned out the owner has a health condition and cannot wear a mask. Even though there is no mask mandate, some of the local businesses are refusing to allow anyone in without a mask, even if it means discriminating against people on the basis of health, so he wanted people to know everyone was welcome in his business, with or without a mask. It was good to hear that, for all the threats and efforts to cancel his business out completely, he’s now busier than ever! It’s a printing business, and he gave me a bunch of business card sized notices of exemption, citing the relevant portion of the mandates (for those municipalities the province put mandates on) and phone numbers.
One of them will be going on my mother’s door, and I’ll be giving her one to carry with her, too.
After visiting the shop, I went to the other hardware store in town, hoping they might have something I could use to cut the piece of door frame for the sun room. Even just clamps, so I could use the reciprocating saw.
I ended up leaving with an inexpensive jigsaw.
My new toy got a major workout today! It even went through hidden nails.
But before I started that, I ended up spending some time on the computer, emailing with my siblings about the situation with my mother. Then I called her and asked for the name and number for the social worker she deals with. These are the people she talks to when there are problems where she lives. She didn’t want to give me the number, saying she didn’t want to make trouble with the caretakers. She had found a note under her door saying that I should be wearing a mask in the building, but it was not signed or anything. She’s pretty sure who left it. We talked about how she should not be wearing a mask, and she again said she didn’t want to make trouble, and just takes it off her face when she needs to breathe. !!!! I convinced her to give me the information, and promised to be nice to them. :-D
It turns out that the number was for a senior’s office, and while they often do things where my mother lives (until they got canceled by the pandemic restrictions), they don’t actually have any say in what goes on there. That falls under a provincial department.
When I called them, identifying myself and my relationship to my mother, then told them what happened, they immediately came to the same conclusion as my mother about who left the note. At one point, I was talking to two people on speakerphone, and they seemed so incredibly happy that I was calling on behalf of my mother. It turns out they have been trying for years to get this caretaking couple fired, due to their horrific and abusive behaviour towards the seniors in the buildings they work in – not just the one my mother is in! – but they have the residents so intimidated, no one is willing to write a formal complaint to the provincial department that manages the building. It turns out this couple has especially targeted my mother, who stands up to them the most. The ladies I spoke to vehemently agreed that my mother should not be wearing a mask, but she has told them she’s afraid of what would happen – meaning how the caretakers would react – if she didn’t. !!! They have already threatened to get my mother evicted, and it turns out they’ve threatened the job of one of the social workers, too!
In the end, I got a name and number for the person they’ve been working with at the provincial level, and they were thrilled that I was willing to call with a complaint (because even if they witness something, they are not allowed to say anything themselves), asking me to let them know how it works out.
When I called the number, though, it went straight to voice mail, so I left a message saying I wanted to talk about elder abuse towards my mother. I will try again tomorrow.
Once I did as much as I could with that, I headed outside and started to set up to use my new toy.
I was being watched!
Sibling snuggles!
So adorable!
Of course, once I started making too much noise, they ran off.
With my daughter’s help, I was able to cut the marked area off the piece of frame. Then we set it in place and…
… made a new mark to cut it again.
Finally! We can close the door with the frame piece.
I had considered screwing the pieces in place, but in the end, decided we’ll just nail them.
The crazy thing is, with all the buckets, jars, tins and plastic margarine containers full of nails all over the place, we have absolutely no nails that we can use to put the frame pieces in!
We’ve got lots of roofing nails, though. :-D
So tomorrow, I will make another trip into town.
Once the frame pieces are back, we will remove the door and use the pieces I cut off the frame on one side, to add to the frame on the other side, so that the door will hang straight, even if the sun room itself is now shifted.
It is all a horrible, messy looking patch job, but until we are in a position to replace the entire door frame, it’s the best we can do for now.
I’m glad I found that little jig saw. It still had a hard time cutting this surprisingly hard wood. That is also managed to cut through some hidden nails, barely slowing down, is bonus.
I will have to make a point of stocking up on spare blades. I foresee using this baby a lot, in the future!
Once we did as much as we could with the door, I had a chance to paint the other side of the support post for the old platform bird feeder. I’ve already picked up a new hanging feeder to put on its hook, ready and waiting. For now, I will not be trying to put on a new platform, and will just leave the little support pieces for that, where they are.
If all goes well, we should be able to set it up by the end of this week. I’ll just have to pick up some more bird seed. :-)
The kitties were happy to see me this morning! :-D
I did find the missing food container that had been in the entry to the cat house. It is, indeed, still in the cat house, but somehow got dragged well into the main space, in an area where I could only see if when the sun was shining through the window in the entry! LOL
I got one side of the bird feeder support painted.
Then it started to rain and I tucked it into the sun room. I’m not sure if I’ll be able to do the other side today.
While that was drying, I started to work on trimming the pieces from the sun room door frame so we can finally hand the replacement door straight. I measured how much space I had, taking into account space needed around the door itself. The piece across the top would be an easy one, but the side piece needs to have a half inch difference between the top and bottom.
I quickly discovered some problems.
I was looking forward to using the table saw for this, only to discover the blade isn’t large enough to cut through. It would only reach half the thickness of the wood. I went hunting in the basement and the garage and did find more blades, but none larger.
I figured I would use the circular saw, instead. I started with the short, top piece, but it’s only 2 1/2 inches wide. I had my daughter try to help by holding it steady on the saw horses, but we discovered that the circular saw couldn’t cut all the way through, either. ??? Well, there’s the reciprocating saw. The blade on that was more than long enough. Except we don’t have clamps large enough to hold the piece in place, and it vibrates so much, there was no way it could be held steady by hand.
Which left using a hand saw.
At which point I could really feel how hard the hardwood is! It took forever to saw the half-inch I needed to remove.
There is no way the side piece can be cut by hand. It’s just too awkward, it’s several times longer than the top piece, and the cut that needs to be made is a very gradual angle. I was able to use the chalk line to mark a guideline to follow, but it would be difficult enough using power tools, never mind by hand!
I might just have to go and pick up some larger clamps, so I can use the reciprocating saw. I was looking at circular saw blades while at the hardware store yesterday, and they had almost no inventory, so I can’t even just buy a larger blade for the table saw.
I’ll make that decision, tomorrow.
So we moved on to other things. Like deciding to use up all the carrots we harvested to make one giant pot of carrot soup.
With the beets, too, since there are so few of them.
As I write this, they are all being roasted in the oven, and the girls are working on the other preparations. We got about 6 pounds of carrots (and maybe half a pound of that is beets! LOL), so it’ll be a triple recipe. We’ve never made carrot soup before. It should be very interesting in appearance, with all the colours in there. The carrots includes purple, white, yellow, and orange, while the beets include red and white, deep red and gold. I figure we’ll get … purplish grey. LOL
The vegetables were all still on the metal mesh “door” in the old kitchen, which is about as cold as a refrigerator these days. Once they were trimmed and removed, I took the time to reinforce the metal mesh. Some of the staples were already popped out. :-(
I’d found some washers in the garage a while back, large enough to reinforce the mesh, but the holes in the washers were too large for wood screws. So I got some smaller washers that would hold the screws.
This is on the support bar across the middle, which had lost the most staples.
Doing the sides was a bit different. The mesh is slightly off center, so on one side, I had plenty of mesh to work with, while on the other…
… there was about half the amount to work with. It worked, though. The mesh feels very secure. Even if the staples somehow end up coming out, the mesh will stay in place. It is now strong enough to use as a soil or compost sifter, if we want.
For now, though, it’s tucked away until we need it next year. :-)
Now to go see how things are going with that carrot and beet soup…
Last night, I finally had a chance to clean up and move out the temporary fire pit I’d set up to burn things that wouldn’t fit in the burn barrel.
It was too dark for photos at the time, so I went back this morning.
This is where it had been sitting, and you can really see how the heat affected the ground, through the metal sheet it was on.
I’ve set it aside near the burn barrel for now. It worked out so well, I want to have it handy for future use.
That weed that managed to grow through a hole in the metal sheet was certainly tenacious!
I had originally intended to dump the ashes behind the old outhouse. That is where we’ve started to dump things that are compostable, but not appropriate to use in the garden later. Then I remembered something.
Not far from the burn barrel, there were two tractors. My dad had given one of them to my nephew. He and my brother, amazingly enough, got it running and were able to move it, though my nephew had to come back another time with a buddy to help him get it home. The tractor had been sitting there so long, its wheels had sunk into the ground, leaving behind holes. They had filled the holes with scrap wood and rocks that they found around the area, but it wasn’t quite enough. While we don’t usually go into this overgrown area, it was still a safety hazard. Especially when the renter’s cows got through the fence. Human or cow, it would be easy to break a leg in them.
I could use the ashes to fill the holes the rest of the way!
So I did.
Here, you can see 3 of the tire holes. The fourth is hidden by the little maples. The holes from the back tires each needed a full wheelbarrow of ashes to fill. A third wheelbarrow was enough to fill the smaller holes from the front wheels. That was even with the pieces of wood and rocks filling them! After those three loads, the fire pit was empty enough that, with maybe another shovelful or two scraped up, I could remove the ring and use the sheet of metal to pick up and pour the remains into the wheelbarrow. That last little bit went onto the larger holes.
So I was able to accomplish two things at once; remove the temporary firepit, and fill in some holes!
As for the little maples growing where the tractor was, I am debating if I want to let them grow, or if I should take them out. In time, we plan to fill in and level out this area, and maybe put in some polytunnels, raised beds, etc. This would be years in the future, and I don’t even know if we’d go into this space. If we leave them, and then find we want to build around there, they would be much harder to get rid of than now.
I still need to cut away the trees growing through the remaining tractor. I can decide then.
With yesterday’s rain, it wasn’t until today that the rain barrel set up by the squash beds was dry enough to try patching again.
The silicon sealant is white, and so is the Plasti Dip spray, so it’s hard to see! Especially after I spread the sealant into the cracks.
Hopefully, this will do the trick and there will be no more leaking. Though, to be honest, the amount that was leaking was so minor, I’m not too worried about it. It’ll just water the spruce tree it’s sitting next to! :-D
I’ll leave it to cure for at least 24 hours before refilling the barrel. Then we will see how well this worked. :-)
This morning, I was a bit late doing the outside part of my morning rounds, having taken the time to finish the second hoop to cover the rain barrel by the sun room.
On checking the rain barrel by the garden, it seemed to be okay, but I did find a very minor leak from one of the larger cracks.
Then I noticed this, beside it.
It’s a bubble of water! The Plasti Dip on the outside it still holding it, but it won’t take long for it to give out.
So I need to empty the barrel, then add more sealant after cleaning and drying it.
I’m out of Plasti Dip, but I did finally find the silicone sealant we’d used to fill the holes in the wall from when the satellite dishes were moved from the side of the house to the roof of the sun room. It’s designed for exterior use, and is what I’d wanted to use at first. So that is what I will use on the inside of the barrel.
For now, though, I think I’m going to shut down the computer as we hunker down. Storms are coming through, and look like they’ll actually hit us this time. So I am expecting to lose our internet completely at some point, and probably at least some power flickers.
The rain is going to be wonderful. It’s been a long time since we’ve had a solid rain.
This morning, I emptied the can of Plasit Dip on the cracks in the rain barrel.
Yesterday, I found a couple of hoola hoops at a dollar store in town, and this afternoon, I dug out the role of window screen mesh we found while cleaning out the basement. I hadn’t quite figured out how I was going to attach the mesh to the hoops, and decided to just sew it on. The only problem with that was holding the mesh in place, so I ended up applying the WeldBond glue I’ve got to the hoop, then laying the mesh I’d cut to size on top of it.
Made a real mess on my hands, pressing it into place, but thankfully, the glue washes off easily.
After it had set long enough, I then just sewed the mesh on with a needle and thread.
It’s a bit on the light side and I want to figure out how to add weight to it. With the screen directly on the top of the barrel, any weight on the hoop could potentially tear the screen. I’ll probably just put a board across the top.
Here are the areas I sprayed with the Plasti Dip, both inside and out. I even sprayed areas that I wasn’t sure was cracked, or just a deep scratch, just in case.
That big crack at the top? It’s actually sealed. I didn’t think it would work, but with enough layers, it filled the gap! Most of the seal on that one is on the inside layers.
After giving the inside of the barrel a quick rinse, it was time to fill it and test out the seal.
As of tonight, it is completely waterproof. When I do my rounds in the morning, I’ll see if it held up through the night.
I’ll also be able to water the garden using water that has had a chance to warm up, instead of ice cold well water. :-D
The second hoop is currently sitting in the basement with the mesh and some glue. Tomorrow, I’ll use needle and thread to attach the screen securely, then put it over the rain barrel by the sun room. It’ll be nice to use the water from there, and not have my watering can’s head get clogged up with leaves and other debris. :-)
It took a while to get the garden rain barrel to the point it could be filled, but I think it was worth it to keep adding more layers to the cracks, with lots of time in between to cure.
It may not be pretty, but it’ll do the job! And that’s all that matters. :-)
The Re-Farmer 