The kittens have taken to napping under the couch regularly. Beep Beep can just barely squeeze under there, herself. A little while ago, my daughter saw her squeeze part way there, then start wiggling oddly. Moments later, some sleepy kitties came out. She then flopped on the floor for them to nurse. She actually woke them up for lunch! :-D They’re more than old enough to be weaned, but it’s still great bonding time. :-)
My daughter got the broken flexible pipe replaced. She did just the one for now.
The other has been left for now, partly to make sure the cold water is working fine and there are no leaks. With the hot water, there is at least a shut off valve at the hot water tank. When we replaced the tank shortly after moving here, the plumber added one on for us. When it’s time to replace the other piece, only the hot water to the house will need to be shut off, and not all the water.
For some reason, the copper pipes are painted, including the end of the flexible hose. My daughter tells me the pipes to the old sink in the entry way, which now supply water to the washing machine, were also painted.
Why paint copper??
As for me, I headed outside for a last bit of mowing.
That’s 4 days of mowing, now, and I’m skipping some places!
I did do an extra bit, though.
I mowed a path to and around the old Farm Hand tractor. Next, we’ll be going in there with the weed trimmer. Once we can access the tractor, we need to cut away the trees that are growing through it. We aren’t able to maintain the tractor itself, but we can at least prevent some types of damage to it!
For the last couple of summers, I’d been able to keep an area to the back gate mowed, large enough to drive through. This year, between the rain and the heat, I just never made it that far.
Today, after mowing the area in front of the storage shed, I decided to mow a path to the back gate. It’s our “emergency exit”, so I don’t want to leave it entirely.
A path, however, is all I was up to!
I cranked the mower up as high as it can go – which is higher than the riding mower can go – and only managed a path twice the width of the mower itself. I actually took 8 passes, just to get it as good as this! The first pass, I had the front wheels up almost the whole way, just to get the height down enough to not choke out the mower.
My daughter suggested it would probably be easier to use the old scythe in the garden shed, instead of a mower, for this stuff! She’s probably right. This is hay that’s being cut! Heck, if we had the equipment (well… working equipment), we could probably get a couple of large round bales just in this section! :-D
I’m hoping to at least keep up a path to the back gate. I don’t expect to make the wide “driveway” I’d kept clear last year. I’d hoped to do more, since the area becomes quite the fire hazard, but we just can’t keep up with it all. More time is being spent on the lawn than anything else right now. As much as I love mowing the lawn, there are other things that need to get done! Ultimately, the goal is to have less lawn, with trees in some areas, and raised garden beds in others. Maybe even a greenhouse or two. Other areas, I hope to replace the grass with moss.
Until then, though, there’s an awful lot of grass to cut!
One of the things that is quite visible when the grass is tall, is a path through the grass, worn down by cats, leading from the yard to under the storage shed. While I was working on the path to the back gate, and was turning to make another pass, I noticed Junk Pile cat, sitting in the newly mowed grass in the shade of the shed, watching me. I think her kittens might be under there. When I told my daughter about it, she said she saw them this morning! Junk Pile cat had brought them to the house for food. :-)
I look forward to seeing them more often and, hopefully, being able to socialize them at least a bit. And their mom, too!
Last night, while heading out to do my evening rounds, I had a little surprise – a stinky friend coming out of the sun room!
I wanted to use water from the rain barrel, but Stinky had other ideas! :-D
He is not, however, the furry friend I was alluding to in the title.
While mowing the outer yard today, I saw a little dark shape, running across from the deep grass to the pile of junk that needs to be hauled to the dump.
Then a mostly while shape followed.
Two little kittens! About the same size as the inside kittens.
I am guessing they are Junk Pile cat’s babies, but they might be Rosencrantz’s, too. I saw no mom around.
This means we might start seeing kittens show up at the food bowls soon!
Which reminds me. I noticed, a couple of days ago, that Butterscotch is no longer pregnant. After what happened with her last litter, it’s hard to guess how many will survive. :-(
Also, this evening, I won lawn mower chicken! I was doing the very last patches of grass for the night, when the mower started to stutter. I just managed to back it up over the last bit of grass when it coughed and died, completely out of fuel! :-D
While I was finishing up with the lawn (though I still have the area in front of the storage shed to do – tomorrow!), the girls tended to the gardens, including thinning out the carrots. We now have lots of little, bitty carrots to snack on. They are all new varieties for us and, so far, they all are quite tasty! :-)
This morning, before I headed into town, I had a conversation with one of my daughters. Later, when I was at the hardware store, that conversation had me looking extra hard at the display of 20 x 20 inch box fans. We need at least a couple, including one for the old basement to replace the one that disappeared.
I finally broke down and bought one.
Plus a package of 20 x 20 furnace filters.
We now have a poor-man’s air filter! :-D A furnace filter is attached to the back of the fan with a few little strips of duct tape. For now, it’s sitting on my husband’s leather working desk as we test out how it works, before deciding on a final spot to put it. This one will stay in the living room, though. Depending on how things go, I hope to pick up another when we’re in the city, for the basement window. For now, I want to see how well it does in keeping the levels of cat hair down! :-D
I also had to pick up a round file while in town. I still haven’t been able to put on the second latch on the screen window. I did find a round file in one of the miscellaneous drawers in the basement, but it’s the wrong type, and was doing absolutely nothing as I tried to enlarge the opening for the new latch post. Hopefully, this new one will do the trick.
The cats and kittens have, of course, been exploring the counters and shelves in the basement, and I’ve been finding a few things knocked to the floor. Yesterday, I found a piece of wood with a rose design carved in relief into it, lying on the floor. Today, I found another piece of wood on the floor; this one had floral designs on one side, and my late brother’s name carved on the other. I don’t recall seeing those when we cleaned up the basement before bringing Beep Beep and Butterscotch indoors. I’d forgotten my brother had tried his hand at wood carving, too, and you can see quite a skill improvement between the two pieces.
While looking for a round file, I also found a small carving tool. I recognize it as part of a set we had, when I was quite young. There were at least a dozen different types of blades in the set. In fact, I’m pretty sure the wood box it came in is what’s now under my computer monitor, raising it up to a more comfortable viewing height. That box now holds my late father’s hair cutting supplies. I don’t know what happened to the rest of the wood carving tools. Considering how long ago we had them, I’m surprised to have found the one that I did!
I set it aside for sharpening. It has a flat tip, like a very fine chisel, that I think I will find useful.
Funny how, after being here for more than 2 years, we’re still finding things like this! :-D
After taking yesterday to recover, I was feeling well enough to continue working outside today.
But first, I got to release the kitties!
:-D
They now know they are allowed to be upstairs when I open the basement door, so they and Beep Beep are all at the top step, waiting for me. As they all go rushing up, there’s an equal rush from the adults cats, going the other direction!
For now, we’re still going to keep them in the basement over night, during days when we’re not around to keep an eye on them, or if we have to go in and out of the house a lot. Keith and Fenrir in particular are not happy about the babies, so we have to keep an eye on them.
The kittens have discovered a safe place to chill out, where the big cats can’t get at them.
Well. Almost.
“If I can’t see them, they can’t see me, right?”
They are certainly entertaining!!
Once I was done my morning rounds, I headed outside to continue mowing around the old garden area.
This time, I remembered to wear my wrist brace. Much to my surprise, it was my wrist that was hurting the most, yesterday. I guess stopping to empty that clippings bag so often was just too much for it.
I really ought to get a doctor to look at that. Knowing me, I probably broke something back when I was helping my brother with patching the shed roof. :-D
One of the things I’ve noticed this year is Saskatoon bushes in places I had not noticed them before. This year is looking to be a really good year for Saskatoons. At least it would be…
I found this large Saskatoon bush among the lilac hedge while mowing. There were no Saskatoon berries here in the last two summers.
This summer, the bush is just full of berries!
None of which I’d be willing to pick and eat.
While some of the bushes have their leaves infested with insect eggs that are weakening them, this one actually looks diseased. A few of the berries look great, but most are smaller, kinda wizened looking, and some have the same spots that are on the leaves.
Such a shame.
Still, while doing my rounds this morning, I was able to gather berries from other trees that are just fine! I will have to try and remember to bring a basket or something with me for the next while, to gather them as they ripen. I’ve been lifting up the bottom of my shirt to make a pouch to hold them, which works fine – right up until I need both hands to switch out the memory cards on the trail came or something. ;-)
Once again, while mowing, I made ample use of the grass clippings. Since I was working close to them, I worked the clippings around the sunflowers.
The clippings are doing triple duty. For the smaller, late planted sunflowers, it’ll help keep them from being overgrown by grass and weeds. The mulch is part of our larger plan to build up and amend the neglected soil here, but for this area, it’s also being used to help level out the poorly plowed area.
The poor lawn mower. No matter how careful I was, I still ended up hitting lumps of rocky soil, hidden by the grass. Other times, the wheels would slide into ruts, dropping the blade onto furrows, leaving me to manhandle the machine out. I must say, I was very happy to see my daughter coming out, letting me know she had finished work for the day and could take over for me! The old garden area is the most difficult area to work on. At some point, we’re going to have to go out there with garden hoes and break apart the worst of the hills the bad plow job left behind. It would be better to use heavy equipment to level the whole area out, but we make do with what we can.
For now, the inner yard is done. Tomorrow, I’ll be checking the blade on the mower and probably giving it a sharpen, before I start working on the outer yard!
That poor little mower is really getting a workout! :-D
I am in so much pain right now. Chances are, I’ll hardly be able to walk tomorrow. But it was worth it!
Let’s back up a bit.
This morning, I got a call from the pharmacy, letting me know my husband’s painkillers were ready to pick up.
Oh, what wonderful news to start the day!
I skipped my morning routine, which my daughters were kind enough to do most of for me, and headed to the garage.
The first thing I did was hose down the area the wasp nest was in. They were still hanging around, but I was able to get the door open and drive out.
I left the door open. :-D
Once in town, and the prescriptions were picked up, I swung by the hardware store to look at what they had for wasp spray. I basically had only two choices: a foam type and a non-foam type. They were also both designed to be used on the nests themselves. I talked to a staff member and ended up going with the non-foam type, as it was also supposed to contact kill for some time after use. Since the next itself was already destroyed, I needed to spray the area to keep them from coming back and building a new one.
Once at home, I made sure to park in the yard, then headed for the garage with the wasp spray. I couldn’t see any wasps, though I could hear some. I closed the garage door from the outside…
… and there they were! They were bouncing right off of me. I moved away and headed for the house, figuring I would give them time to calm down, but they followed me!
I’m glad I happened to be wearing a golf shirt, with thicker fabric. At one point, I looked down and there were two wasps on my boob, stuck in the fabric, trying to sting me! I was able to pull the fabric away from my body and blow them away.
It was only later than I realized, I did get stung! Right on the boob. I never really felt anything. It took a while, but I realized why it didn’t hurt. Some 20 years ago, I had breast reduction surgery. With the amount of tissue removed, it was basically a complete reconstruction. I was warned in advance that, since nerves were being cut, I would lose some sensation, and that it might never return. I did regain most of it, but I do have areas where I don’t feel anything at all. It looks like the wasp stung me in one of those areas!
Which is… good? LOL
Since I didn’t want wasps around the house, I went back to the garage and went in through the back door. I could see some of them going through the opening in the wall, but not as many as I was hearing.
I then proceeded to spray the heck out of the area where the nest was, up to the underside of the roof peak, and along the beam on either side of where the nest was above the door.
What I didn’t count on was how quickly I’d run out. I had intended to spray the opening from the outside, but by the time I went out there, the can was pretty much empty.
When I was done spraying, I went to switch out the trail cam memory cards, which was the only part of skipped morning routine left for me to do.
I had company.
She is not meowing at me in this picture. She is hissing! Oh, what a mean kitty she is! :-D
I checked on it the garage throughout the day. I only ever saw one dead wasp on the ground. From the inside, I could see wasps land in the opening, start to come in, then leave. So they could tell that something was amiss.
By the end of the day, when I had to put the van back in the garage (we’re expecting more storms tonight), I was no longer seeing or hearing any wasps. So I hope this took care of the problem!!
Today was another hot one, but there were a few things that just needed to get done. One of them was to finally put those latches on the new basement window. With the distraction of the wasp nest, I never did get it done yesterday.
I only gone one side done, though. When I went to do the other side, I discovered the hole for the post to go into was just a bit smaller than the first one. New latches of this time all have a standard size post, no matter what size the rest of the latch is. I’ll have to find – or buy – a round file to enlarge the hole just the tiniest bit, before I can put on the new latch.
So that’s only half done.
I then had to start mowing the lawn. Between the heat and the rain, the yard had gotten really over grown. With another storm looking like it will hit tonight, decided to go for it.
For the first time since getting the new mower, I kept the bag on to keep the grass clippings for the entire time I mowed. The grass was so tall and thick in the first area I worked on, I had to empty the bag about every 50 feet or so!
In the end, I got only a small section done before I had to stop, go inside and cool down.
The best place to cool down is the basement! It was a great excuse to check on the old basement.
What a difference! The area the dehumidifier is in is almost completely dry. I checked the hose and, to be honest, I couldn’t really tell if water was dripping through there, but I’m assuming it is. The water that was all over and around the well pump, from condensation, is almost completely dry.
The section under the window is also noticeably drier, though it still had big wet patches. There are still damp spots under the furnaces, so I changed the angle on the blower fan to face the floor under there. The last thing we need is for the new electric furnace to start rusting!
My making a commotion in the old part basement attracted attention, of course. I had a whole bunch of kitties at the divider, watching me and wanting to play!
So I went around to the new part basement and joined the kitties for a while. Though I’d washed up after coming inside, my clothes probably still smelled of bug spray, so they actually left me alone a fair bit.
A few days ago, I’d started another hair pin using lilac wood. I’d roughed it out to the sanding stage, so I finished it off today.
Given the size and shape of the piece of branch I used, there wasn’t a lot of options for what to do with it. I still wanted to highlight the colours inside, so I made a simple spiral cut. This picture is after it was completed and oiled.
My daughter is ecstatic with it! :-D It’s longer than the first one I made, too, which is much better for her mass of curly hair.
By the time I was done with that, I found the kittens were all done, too!
I had hoped in this time, I would have gotten enough rest so I could go back outside and continue mowing, but it wasn’t. I ended up needing to nap! This meant I was going back outside at the hottest part of the day 28C/77F, with a real feel of about 32C/90F! Thankfully, though, the sun was low enough that the areas I needed to work on were mostly in the shade. After moving the van to where I’d already cut, the grass, I then spent several hours working on the lawn, with many, many stops to empty the grass bag.
I now have plenty of clippings to mulch the new garden area where the wood pile used to be. I added a lot around the grape vines, to help keep down the things that are trying to encroach on them. The old kitchen garden has piles all over, which the girls will spread out for me, tomorrow. When working on the north yards, I added the clippings to the compost pile already there, and it’s now full.
We need to start a new compost pile.
I love this new mower. With the frequent stops to empty the bag, it got harder and harder for me to pull on the cord to restart it. No matter how rubber my arm got, though, it started every time! With the old push mower, I would have had to stop long before finishing.
I’m so glad to finally get that done. Everything looks so much better now! I still need to go around the old garden area, then the garden area itself – today, I just mowed around the potatoes, which are coming up quite nicely – but that can wait for another day! I got the main parts done, and the rest can wait a bit longer, if the weather doesn’t co-operate.
It’s been a bit frustrating this year. As much as I appreciate the rain, between that and the heat waves, the lawn is about all we’ve been able to keep up with. I’ve barely managed to do any clean up near where we plan to build the cordwood outhouse, and we certainly haven’t been able to start on clearing where we will be building it. This year, I was supposed to continue clearing the spruce grow – I even have a working chain saw to make that job easier! We’ve done nothing.
With my husband being in the hospital for 3 weeks last spring, and so many follow up medical appointments, it’s no surprise we fell behind on this stuff last year. It’s now feeling like we’re going to lose another year, this time to weather!
Maybe we’ll have a long and mild fall to make up for lost time. Here’s hoping!
I’m just happy I managed to get done as much as I did today. I expect that tomorrow is going to be a major pain day because of it, but it was worth it to finally get this stuff done! The yard look so much better now. It’s more of a psychological boost than anything else, but those are important, too!
As I write this, I’m having a hard time wrapping my mind around how not-late in the day it is. :-D It feels like it should be early evening. Granted, part of that might be the lighting out my window North facing window right now. It’s looking a bit dark out there, even though it’s not that cloudy. We’ve got another storm heading our way. The storm itself looks like it will pass us on the North, but we’ll likely get some rain. There’s another storm that might hit us, during the night, but I suspect that one will pass by us as well.
Anyhow.
After tending to the kitties this morning, I brought both of the windows for the old basement outside. I’m happy to say the Weldbond seems to have a marvelous job of not only adhering the window screen in place, but the metal mesh as well. I was hoping it would hold the metal. That means that all the staples I used to attach the screens, as well as the metal plates, are all now bonded to the frame!
First things first, though: tending to the outside cats.
They were oddly nervous this morning. When I headed into the sunroom, I saw why!
Look who was visiting!
In the sunroom, we have two identical bins; one for the cat kibble, and one for the bird seed. The skunks had been managing to get the cat kibble bin’s lid off, and eating the kibble. The lid had a crack near a handle, so I switched it with the other bin. The skunks have not been able to open it, since.
I guess this guy was getting pretty hungry!
Gosh, he’s so cute!
After feeding the critters, I had an extra job to include during my rounds.
While in town yesterday, I was able to pick up 10 new little flags to put on our fence posts, replacing the old ones that were torn to shreds. There wasn’t enough of a wind to be able to see all of them in this photo, but when they’re all flapping in the breeze, it looks really awesome!
With my rounds done, I headed inside for a bit, to give the cats (and guests) a chance to eat, before testing out the window.
This is the eyesore we’ve had for the last while.
You can see a nail in the wall above the wooden frame, which would have been used to hold the metal mesh frame in place. We just shoved things in to prop it a bit, and the foam insulation made sure nothing got into the basement.
What a mess.
After moving the stuff out of the window well, and pushing the insulation into the basement (there is a platform under the window for it to fall onto), I swept up the dirt a bit.
I need to prioritize getting some puck board to make a new “roof” over this. It served a definite purpose!!
Then it was time to finally check out the new window.
It fit perfectly!
The top kept tipping forward, though, so I had to hold it to take the photo.
Not only did it fit the opening as well as the plastic window, but it is even just as flush!
That is the hole for one of the latches on the plastic frame. We can just get another pair of latches, and use the same holes.
That weather stripping must have been what made the difference, because this frame is easily twice as thick as the plastic frame.
I should probably get some of that self adhesive foam weather stripping for this frame, too. Not to keep the weather out, obviously, but to keep insects from crawling around the frame.
For now, I just propped up some bricks to hold it in place. I will see about getting new latches tomorrow.
I am so happy!
Then it was time to go into the basement and take care of that foam insulation.
Here is how it looks on the inside. The platform the insulation is now lying on was built to hold a box fan, which is among those things that disappeared while the house was empty. It still comes in handy.
The breeze though that window, though! Wow!!!
Now that the screen is in, I unplugged the blower fan, to give the motor a chance to cool down. We’ll get it going again later, though, because it’s really damp down there.
Which had me checking something else out.
When we moved here, there was a dehumidifier in the corner, next to the well pump. When the girls painted the second level, they had to lug it upstairs, because it was so humid, the paint actually sloughed off the walls. So we know it works.
Sometime between when it was returned to the basement, and this spring, the water reservoir for it disappeared.
I don’t know what happened. It was there when the dehumidifier was brought downstairs. The only people besides us who have been down there has been my oldest brother, and the plumber. So what happened to the reservoir? I have no idea.
Today, I took a look at where the water would drain from and realized it was a standard male coupling, like for a hose.
We have spare drain hoses for the hot water tank; these are short hoses with a female coupling at each end.
It fit!
This is what we have now.
I’ve got the hose draining directly into the sump pump reservoir. This area is getting the most water right now, due to the condensation on the well pump and all the cold water pipes.
Since there is no reservoir in the dehumidifier, there is nothing to trigger the float to shut it off automatically. Theoretically, it will just keep on running, non-stop. We will have to check it to make sure it’s working properly, later.
Between the window screen and the dehumidifier, even with the blower off for a while, it should make a big difference in the state of the basements.
Even the new part basement.
Where I had an audience, trying to check me out!
The new part basement has its own fan, but the cement is clearly saturated. This concerns me, since it means the weeping tile is not doing the job as well as it should. After what we discovered when the septic pipes got plugged, I was afraid it would be an issue. *sigh*
Oh! The rain seems to have reaches us now. Time to shut down the computers, just in case!
Another reason we need to get that “roof” over the basement window. The breeze is really nice, but there is nothing to stop rain from getting in.
Dang. I took to long to finish this post. Looks like we lost internet! Here’s hoping we don’t lose power – and this post!
If you’re reading this, that means I managed to save it… :-D
I am happy to say that I got the window for the old basement built – with considerably kitten interruptions!
While I did that, the girls installed the new kitchen faucet set. It turns out there are no shut off valves on the water. They had to shut off the main valve for the entire house.
On the list of things to do: add shut off valves all over. I’m pretty sure the bathroom sink doesn’t have any, and I know the toilet doesn’t. In following the pipes through the basements, the only valves we found where the ones for the outside taps, that just shut off every winter.
Also, the cold water pipes and well pump are all just dripping with condensation!
So we now have a nice, tall faucet on the sink that we can actually fit my big stock pots under. :-)
As for the window, this was my template.
As you can see, I have an enthusiastic helper!
This is the window we leave on throughout the winter, with 3 inch thick foam insulation on the inside. When it warms up, we would take it out and place a wire mesh “window” over the opening to allow air circulation to help keep the basement dry. It is much bigger than the window opening, and the wood framing the metal mesh is old and rotting. It finally broke apart last winter. Right now, we still have it leaning on the wall, but with the broken frame, critters could easily squeeze through, to the insulation is still in the window opening.
I used a piece of some of the wood I’d brought from a shed and used to make the screen door so we can leave the old basement door open. One piece was enough, even after cutting away the water damaged end.
I used the window to size the pieces, then double checked the sizing after cutting. The back of this window has self-adhesive foam weather stripping around the edges, but half of it is missing, so the pieces can’t lay flat, but it’s close enough.
Also, it’s very interesting to use a miter box with kittens trying to climb all over me and my work table! I had some trying to chew on the miter box, while others would take flying leaps at my legs, then climb up onto my shoulders.
The little beasts! :-D
The next step was to ready the right angle plates I got for this.
This was my original plan; I’d use a combination of wood glue and these plates to secure the corners. I thought to put them on the inner edges of the corners, first, but changed my mind and decided to put them on the outer edges. I marked out the screw holes so that I could drill pilot holes, later.
It…
Didn’t work.
I started by using wood glue on a corner, then putting on the plate, only to discover the screws I had were a fraction of an inch longer than the wood was thick! It was juuuuuusssssttt enough that I screwed the corner to the table a bit.
The other problem, however, was my pilot holes. They were shallow holes; I just wanted enough to make getting started, easier. A few of them ended up being ever so slightly off centre, then some of the screws started going off on angles.
The end result was that the angle plate ended up making the corners less squared!
So I took off the couple I’d put on and left it for later. I had already glued the pair of corners, which were supposed to be clamped for 10 minutes. I don’t have right angle clamps. One didn’t really need it, but I did end up using a C clamp on the other.
It was a good thing I had to wait for the glue to set for a while, because at that point, I was being thoroughly loved on and cuddled by Big Rig. Then Leyendecker joined us. Then they fell asleep on me! After a while, Big Rig took off, but Leyendecker stayed. I finally had to move, and discovered David settled in one of their box caves, so I put them together – and Leyendecker stayed!
Until my husband came down, and he ended up with kittens nursing behind his butt. :-D Finally, Beep Beep got tired of that – and she joined David!
David is such a sweetie will all the cats and kittens!
I was, eventually, able to continue with the window. :-D
One of the things I found among the many, many things shoved onto the support beam, between the floor joists above, was a roll of window screen. I dug it out and, after gluing the remaining two corners of the frame, used it to measure off a piece of screen.
I actually ended up throwing away the first piece I’d cut, as it turned out to be damaged.
I don’t know how long that roll had been sitting there, but it was just caked with dust!!! Enough to make unrolling it very… sticky. :-/ I cut the mesh larger than the frame, so that I could fold the edges in, for extra strength.
I also cut some of the wire mesh to size.
After fighting with the window screen for a while, trying to get the edges folded under, it occurred to me that I was working on the “pretty” side of the window frame, and that the screen and wire mesh needed to be on the “ugly” side, that would be facing inside the basement.
No, the wood glue wasn’t dry enough to hold, yet. Which was fine. After I flipped it, I just stuck it back together and kept going.
It took away longer to get those edges to fold under than I expected! Here, I’ve tacked the screen to the frame at the corners with a staple gun.
Once it was tacked in place, I got out some Weldbond adhesive and applied it to the edges, then used a cast off piece of wood to spread the adhesive and push it through the screen.
Then I added the wire mesh.
I was going to say I went overboard with the staple gun, but to be honest, I seriously considered adding even more. Every wire around the edge has a staple, alternating between the outside edge, and the next wire in.
The corners each got at least 4 staples. :-D
I’m hoping that, between the Weldbond and the staples, no critter is going to be able to force their way through.
I wasn’t gone yet, though!
Remember those plates?
It took some hunting, but I did find some shorter wood screws to use. The plates were positioned based on the wood based on where the wire was. As long as the point lined up with the corner joins, I just needed to not have a wire in the way of the screws.
Between the plates and the wire screen, this frame is not moving!
Next, I needed to add handles. I used cast off pieces of wood under the metal plates, to keep the adhesive off the worktable. I’d already accidentally screwed it to the table. I didn’t want to glue it, too! :-D
The weather stripping on the back of the window wouldn’t let it lie flat, but I could at least line up the edges. I then marked the sides of the new window frame at the latches, and at the knobs.
I then added the handles with the bottoms lined up with where I’d marked the placement of the knobs.
The latches on the window fit into holes in the window opening outside. Once in place, the window is flush with the wall around the window opening. The wood is much thicker than the plastic, so I know at the very least, it will stick out from the wall. What we might end up doing is adding another pair of latches, so the outside of that window opening will have the fittings for both windows on them.
We’ll make that decision later, though. It will all depend on how it fits.
For now, the window is finished. I’ll leave the adhesive to dry overnight, and tomorrow, I’ll see if I got it right and it fits – or if I screwed up! :-D
Once I know how it fits, we will be able to see what would work best for fastening it in place.
After that, the only thing left will be to paint it. We have several things that will need painting, so we’ll wait until later in the season and do all of them at the same time.
Happily, we are now able to cross a couple more things off the to-do list. The list isn’t going down as fast as I’d like, but it is going down! :-)
Going down to tend to the kittens in the morning has become a two person job. The kittens are on the top step when the door is open, so we’ve got one person at the door, trying to pick up kittens so we can use the step, while the other holds a laundry basket to carry them in, and to catch the ones that slip past.
The kittens love that laundry basket! After they get a ride down the stairs, they stay and play in and around it.
Beep Beep loves that thing, too!
Temperatures have been cooling down a bit, lately. The overnight temperatures meant actually being able to sleep at night! We’ve to thunderstorms predicted for today and tomorrow, then we’re supposed to stay in the mid-20’s (77-80F) for the remainder of the long range forecast.
It really says something that “mid 20’s” are now “cooler” temperatures. Even during last year’s drought, those where our hot days. We did break 30 every now and then, but nothing like what we’ve had this year.
It does make the morning rounds outside much more pleasant.
Except for all the mosquitoes and horseflies. The horseflies usually ignore me, but I got bit this morning.
You know why they’re called horseflies?
Because getting bit by one is like being kicked by a horse, compared to mosquitoes!
It took a couple of hours, but the pain and swelling did go down. Now I just have a weird white spot at the bite, surrounded by red, and a bit of residual swelling.
After doing my morning rounds, I headed into town for a few things. One of my stops was at the pharmacy, to see if my husband’s one missing prescription got updated. Still nothing, but they did have the remains of a prescription for 3 days worth of pills on file, so I took that. These are my husband’s main pain killers. It’s not just the increased pain that’s a problem, but it basically has him going cold turkey off of a very powerful drug, and it’s doing all sorts of crazy things to his body.
With the lack of response from the clinic, I might just drive there on Monday.
Another stop in town was at the grocery store, with our water jugs for refilling. There was a line up outside, which gave me time to notice and get pictures of these guys.
Such gorgeous moths! Just hanging out on the wall, along with all the fishflies. :-D
While I was in town, the girls got everything ready for a trip to the dump, so I could unload, reload and take off right away. We’ve been needing a dump run for a while! Normally, when I get there, I unload into the bins by the caretaker’s shed (which then get hauled to the city). This time, I decided to go into the pit. As I checked in with the caretaker and mentioned I was going into the pit this time, he told me they’ve been having problems with bears lately!
The last time I went into the pit, it actually was a pit. Now, it’s so full, there’s just enough space for vehicles to back into it, and add things to the pile. !! I really don’t like going into there, mostly because I’m paranoid about my tires. I don’t want to be driving over nails or broken glass or anything like that. :-(
After unloading the garbage, I went back to the bins to unload the recycling and electronics garbage. I was just getting ready to head out, when I saw a truck pull in, hauling something.
Something large, round and made of steel.
The driver stopped to talk to the caretaker, so I just had to snap a picture, as I was leaving!
Yup! A bear trap!
In our area, we have typically only have black bears. They tend to prefer to stay away from people, but what bear won’t take advantage of free food – and defend it? Much better for the bear, to catch it and release it well away from the dump.
Once home, I had hoped to start on some work outside. Maybe get some mowing done. It started to rain a bit on the ride home, and now I can see dark storm clouds in the distance, through the security camera.
I guess that means it’s a good time to join the kitties in the basement, and finally build that window for the old basement. :-)
Today, I finally got the riding mower in to the shop for some TLC. We finally got to use the new ramps my brother bought me. <3 The girls and I had to take the middle seats out of the van (one of the first things we did after buying the van was take out the bench seat in the back; we never put it back and left it behind when we moved) to fit it, but we got it in, with room to spare.
It was rather funny when I got to the shop. After talking to the lady at the counter and getting the work order form filled in, I asked about getting it unloaded out of my van.
She did a double take and looked at me. “It’s in your van?” Yes. I can fit a lot in that thing!
She got someone to come out to unload it with me. As we were walking out, he asked me where it was, and I told him it was in the van. My van was the only one in the parking lot at the time.
He did a double take.
“You got it in a van??”
:-D
Yes. Yes, we did!
So that is now delivered, and I will get a call with an estimate before they work on it. I made sure to mention the drive chain had come off, and that I didn’t bother putting it back on, since I can’t reach under to tighten what needs tightening. I also mentioned the tire I think may need replacing, as well as mentioning that it’s had a hard two years, so if they see anything else, let me know!
Thankfully, we have the new push mower, so there is no rush to get it done.
Once that was done, I called up my mother to see if she was home for the next while. My timing was perfect, as she did have something booked later. The building she lives is has started to hold social events again, organized by a social worker. I had just enough time to pop over. I told her I had something for her; a mushroom!
“Oh! I hope it’s okay,” she says.
It took me a moment to realize she thought I meant mushrooms I’d picked at the farm. :-D I cleared that up with her!
Now, I wasn’t sure how she would respond to the spoon. My mother is not exactly gracious with gifts. In fact, she is often very cruel, and I would not have been surprised if she refused it. As it was, when she finally saw it, she immediately started talking about what kind of mushroom it was that she wanted me to carve for her, and doodled it on the back of an envelope. I explained to her (again) that I got a spoon blank in my carving kit, and when she asked for a mushroom, I decided to include on in the spoon, and a morel was basically what fit. I would need wood in a different size and shape to carve what she wanted – and now I have her sketch to go by. She just laughed and said there was no hurry.
I had to ask specifically if she wanted to keep the spoon or not, since she had dismissed it immediately to do the sketch. I told her it was my first carving, and that I was offering it to her, if she wanted it. She said she would keep it.
Getting that straight was a bit like pulling teeth! I think she might actually like it, but I’m not sure.
Then she asked me if she’d ever shown me her Russian spoon. No, she hadn’t! So she brought it out for me to see.
While the spoon is from Russia, she got it from her late aunt, who was born in Canada. My mother said that it was spoons like this that they used for eating, when she grew up in Poland. (What a large size for an eating spoon!) She mentioned that the spoons they used were painted, too, and commented on how they must have been eating the paint, as it came off over time. Who knows what was used to make the paint; it’s unlikely to have been something commercially prepared, in that region and time period. Home made or purchased, any paint still could have been potentially toxic!
I’m really glad she showed it to me.
Once at home, I decided to spend some time in the basement to work on a hair pin my daughter requested. I’ll post about that separately. Before I do, though, I just had to share my company!
Of course, as soon as I sat down at the work table, I had kittens all over me. They did eventually move on, except Big Rig.
Who decided to give my arm kisses.
My goodness, she looks like Susan (who would be her big sister!).
Then she heard a kerfuffle and ran off to join her siblings.
Beep Beep is so patient! :-D
Later, I looked up from my work and found this face, staring at me.
Nicco looks ready for a nap! :-D
The lilac wood she has a paw on is the branch from which I’d cut off a piece for the hair pin.
Unfortunately, at the point I was at when I took that picture, I was needing to use the Dremel, and the noise chased her away.
I was actually able to start and finish the project, even with the kittens crawling all over me, so that worked out much better than expected!
I’ll have photos of the finished hair pin in my next post.
Our high of the day was reached at about 4:30 pm! 32C/89F, with the humidex putting us at 36C/97F. We’re not going to be cooling down much, even overnight, either.
At least there’s a wind, and on the weather radar, it looks like we’ll at least get some rain this evening, if not the thunderstorms. Those look like they’ll go right past us.
It was, at least, much more bearable when I did my rounds this morning. That, and the basement is nice and cool for the kittens.
Since they have gotten so good and escaping as soon as the door is opened and my hands are full, I’ve sacrificed one of my slightly taller laundry baskets for kitten jail.
I succeeded only in catching David! :-D He loves that thing!
I ended up just leaving the door open and let them be, until after I was done outside. By then, a daughter was available to help herd them back downstairs.
I am happy to say that some of the replacement sunflower seeds we planted are starting to sprout! They are just starting to break ground. The ones from the first planting have, for the most part, been growing quite well.
Something has been digging into the softer soil where we planted the seeds. Whatever it doing it, isn’t after the seeds themselves. This time, at least, the seedling didn’t get dug up in the process. My guess is, skunks are after grubs or worms.
We did, however, have a couple more losses of the original seedlings.
Something just up and ate a couple of them! Most likely deer. *sigh* The deer aren’t coming around much anymore; there is one that I’ve been seeing at the gate on the trail cams, but that’s it.
So far, at least, nothing has been eating the squash plants, and it doesn’t look like we’ve lost more beet greens.
The small mock orange by the side door of the house is going to be blooming very well this year! It got a major pruning, the summer before we moved out here, so that the walls could be painted, but it has recovered very well. The other one by the clothes line platform had a rough time last year, but it does have some flowers – all along the bottom! Most of it, however, has no buds at all.
These guys are finally starting to open. I expect to see many more, within the next few days!
This little shrub along the south side of the driveway has lots of berries on it. I have no idea what they are. There are quite a few of them around, but only this one has berries. I’m thinking location has much to do with it. It’s the only one that gets a lot of sun all day. The others are shaded by trees or sheds.
If anyone knows what this is, please feel free to let me know in the comments.
For now, I’ll just assume that whatever it is, is poisonous, and just appreciate it for its beauty. :-)
Forecasts for today were for a high of 29C/84F, with the humidex at 33C/91F, with afternoon thunderstorms. So I wasn’t expecting to accomplish much outside.
In the end, I wouldn’t have been able to, anyhow. Pain levels are pretty high today. As long as I’m just walking on level ground, I’m okay – I’m just limping and hobbling like a decrepit old lady ;-) – but any sort of step sends shooting pains in my right knee.
I’ve been using my husband’s bath chair more than he has, lately! :-D
I was still able to do my rounds, as usual, though.
Rolando Moon has been hanging out in this tree, and on the roof, lately! She is so deceptively adorable. :-D
She even joined me when I was switching out the trail cam memory cards.
We have some new flowers I wasn’t expecting yet, this morning.
My mother has had a small flower garden along the East side of the house for as long as I can remember. This iris is near where we now keep the bird feeder. They and some lilies were completely crowded out by other greenery (I’m not sure they those were planted deliberately or not) and chickweed, but I managed to weed them out at least a bit. There were no signs of buds anywhere, then suddenly, this morning, there were two flowers!
Still no signs of other buds, though!
In checking the garden plots, it seems to me that something might be eating our beet greens in one of the plots. I’d thought at first that the cats were digging in the garden again, and that’s why it looked like there were fewer beets, but as I weeded, I noticed bare stems. It might be deer, but while I have been seeing deer at the gate in the trail cams, they don’t look like they came from the yard at all, but more like they’d come from the direction of the barn. Plus, I would expect deer to do more than nibble a few leaves here and there. I suppose hares are another possibility, but with the presence of yard cats, I don’t think we actually get them in the yard. So I’m not sure what’s going on there.
With no plans to work outside, I made a trip into town. I wanted to pick up a Dremel tip so I could finish my spoon, as well as pick up another litter pan for the basement. The kittens are getting bigger, and one pan isn’t enough for them anymore! The kittens were thrilled, which is pretty funny. Who knew litter pans could be so much fun for kittens?
I’ll post about how the carving went, separately. While I was working, however, I did have company!
Two Face and David joined the kittens, too. Between playing with them, and crawling all over me, the kittens got tired right out! :-D
When I was done and started up the stairs, I found someone looking at me!
David found one of the kittens’ favorite spots!
Then he “pounced”. :-D
What a funny boy!
While uploading photos to write this post, we lost our internet as a thunderstorm rolled by. From the looks of the weather radar, there is a very long, narrow storm system heading our way, so I think I’d better get to my other post, then shut the computer down, while I have time! :-D
Uh oh. Looks like we lost internet again… oh, it’s back. For now.
The Re-Farmer 