My original plan for the day had been to go into the city for our second stock up trip, but that just didn’t happen. Not only was I very tired from being up so late making and canning the tomato paste, I was in a load of pain. Arthritis sucks at the best of times, but everything else was hurting, too!
By the afternoon, I was feeling a bit better, so I went outside to do some clean up. I figured I would give the water bowl shelter a quick scrub down, and tomorrow we could start painting it.
Ha!
That worked out well enough until I went to flip it upside down to scrub the bottom.
The first time I flipped it on its roof, two floor boards fell off.
Most of the boards are nailed in place, but this salvaged wood is pretty warped and starting to dry rot, so they don’t hold well. I did have 1 3/4 inch screws in a few of them, and those ones held, so I flipped it back again, nailed the boards that fell off back in place, then added some screws.
Then I flipped it upside down, and a different board fell off. And that one did have screws already!
I fixed that and added more screws, flipped it back and…

That board has several screws in it, and it still fell off. It’s basically too warped for the screws to hold. I need longer screws, but the next size up I’ve got are 3 inch screws, and those are just too long. Especially since I’m doing this by hand.
So tomorrow, I’ll pick up some 2 inch wood screws and get those back on. It only has to hold long enough for us to paint it. After that, it won’t matter.
I let the girls know the status of things, including that I was unable to scrub the inside back wall, because I couldn’t reach it, then moved on to something else.

I did some chop and drop around the haskap berries, now that my mother’s flowers are past their prime. I’ve never bothered to do this before, leaving the stems to clean up in the spring, but this year they got SO tall, the completely covered the haskap berries. So now they will be a mulch, and the haskap are finally getting some sunlight.
I had lots of company while I worked.

I like this baby. He spends most of his time just hanging out nearby.
We had haskap
We had no berries at all this year. The male plant bloomed, but I never saw flowers on the females. Hopefully, next year will be better, but I think I just need to move these to a better location.
While I was working on that, one of my daughters came out and worked on the water bowl shelter.

She tacked the floorboard back on, crawled in and got that back wall scrubbed.
If we’d had the paint earlier, we would have scrubbed and painted all the parts and pieces first. That would have made things much easier!
Ah, well. We’ll manage.
That tuxedo really likes the water bowl shelter. He’s always hanging around in or under it!
Once the shelter is dry, it’s going to need another brush down to get the stuff currently stuck in place because it’s damp. With the condition of the wood, we don’t want to use a hose on it any more than we absolutely have to. It’ll be good to finally have it painted and set up in its spot by the kibble house and cat shelter. We’ll be creating a sort of U shape with them, which should help reduce drifting, too.
Little by little, it’s getting done!
The Re-Farmer
I HIGHLY recommend FlexPaste or FlexGlue. They can dry out fast so the mini tubes of FlexGlue are best for me. Soooo much easier than scews, nails, power staples, etc
LikeLiked by 1 person
It will hold things together that aren’t touching? In some places, the gaps created by the warped wood are almost a half inch wide. 😄 At least if the screw is long enough, it can pull the board in. The screws I had on hand were not quite long enough to do that!
LikeLike
Yep! The paste is designed to fill gaps. But you really need to use the whole tub at once. Prob would have been perfect amount for the entire feeding station repair.
LikeLiked by 1 person
Good to know. Thanks!
LikeLike
There’s no such thing as “male” and “female” haskaps.
Whoever is selling them as that is wrong.
What there is, is a need for a 2nd variety as a pollinator and not all varieties will pollinate each other.
More info (correct info) can be found at haskap.ca including Dr Bors’s chart of what varieties will pollinate what (on the FAQ page).
LikeLiked by 1 person
Thanks. I think “male” and “female” just makes it easier for people visualize. When I was researching before getting these, it was recommended to have one “male” for up to 5 “female” – basically what the site says, too. The varieties I have are Aurora and Borealis. They just don’t seem to want to bloom at the same time! I think I just have them in a bad spot.
LikeLike
Yeah, I figured it was supposed to make it easier, but it’s very, very misleading, since it’s different varieties needed not different sexes of the same variety.
LikeLiked by 1 person