Before I get into the progress we got done while my brother and his wife were here, I must share the cuteness!
The kittens had all been asleep, curled up around each other, but my trying to take a photo woke up the little black and white kitten. Who looks huge compared to his adopted sister!
I love that little black chin.
While my daughter and I were heading to the city, my brother and his wife were heading her to the farm! Along with stuff they had to do in their stored areas, my brother checked on the septic ejector. We’d had to use electric tape to fix the heat tape to the portion that is above ground, and my brother had to take it off before he could open up the cap and check inside the stand pipe. Using the copper pipe we kept nearby, he later told me that he was hitting ice about 4 feet down. No chance of being able to switch over from the emergency diverter right now! He had looked for the de-icer we used before, but it just isn’t available this time of year. He found something else meant for RVs and poured that into the stand pipe. Hopefully, that will get things thawed out faster. He wrapped the heat tape back around the stand pipe lower down, so that we can still access and open the cap if we need to. It turns itself on and off depending on the temperature, so he wants to leave it for now.
I had some concerns about how loose the soil around the new ejector is – plus, a portion of the old ejector’s stand pipe was still sticking out of the ground, about 10 feet away. Once the renter’s cows are rotated to this quarter, they could easily sink into the soil/clay/gravel around the excavated area and injure themselves, or even break the new ejector, as it’s so much shorter than the old one was. My brother cut away the piece of the old stand pipe that was sticking out and filled the buried portion with soil. He also went into some of his supplies that they brought from their sold property to here, putting in some fence posts, then using some of their rolls of snow fencing around the entire ejector area, including the metal sheet we have to direct the flow towards the low area, away from the barn. He secured it as best he could for now, but I will need to go back there with more twine to secure it more thoroughly. Plus, there is a gap that cows could easily get through. I need to find something I can put across there that can be easily opened like a gate. It will be some time before we have cows out here, so there’s no hurry on that, but I’d rather get it done sooner rather than later.
That was not the big job, though.
The big job was working on that dead tree that fell on the outhouse.
My brother had also been thinking about how to get that off, without destroying the outhouse. It does still get used, even with the tree sitting on it!
Part of the problem is that the top of the tree fell on top of another tree, and is stuck. That’s the only thing holding it up and keeping it from crushing the outhouse! So it’s a good thing, even though it makes it so much more difficult to get the tree off.
One of the first things my brother wanted to do was cut off the top of the fallen tree, on the far side of the tree that’s holding it up, to get some of the weight off. He set up a ladder against the tree holding the fallen tree up and, after trying several other things first, ended up using my little electric chain saw. He cut through only until we could hear it starting to crack. It was too dangerous to try and cut all the way through while on a ladder. Once he got that far, he climbed back up the ladder with a rope to toss it over the top of the tree, using a hammer as a weight, on the far side of the cut.
The next while was spent trying to get the top of the tree down with the rope. At one point, my brother and his wife were pulling the ends of the rope together from the same side, which caused the entire tree trunk to sort of roll, rocking the outhouse in the process! The rocking even caused the door to pop open. In the end, they went one on each side of the fallen tree, trying to pull it down. The problem was that the tip of the tree was on yet another tree, eventually getting caught between a branch and the trunk. This other tree, however, was also quite dead. When the top of the fallen tree finally gave out at where my brother had cut it with the chain saw, the heavy end dropped straight down, and the tree it was hung up on fell and broke in several places, hitting the ground in pieces. The top of the tree on the outhouse, however, ended up standing on its end, up against yet another tree – and it’s still standing there now!
The next thing to do was to start cutting away branches. Some, my brother could cut away using his extended pole chainsaw/pruner, but with others, it was back up the ladder with our electric chain saw. He got as much as he could, while my SIL and I grabbed and hauled away the branches.
There was only so much they could get done tonight, though.
In the first image above, you can see where the branches above the outhouse roof were cut away. He even took a chain saw to the sticky-outy-parts of the roots at the base of the tree.
My SIL noticed something interesting, though, as he was up there.
If you look at the next couple of photos in the slide show above, you can just see that the tree is no longer in contact with the outhouse roof! There was more damage done to the corner of the roof when the tree was being rocked while the top was being pulled down. While my brother was on the ladder, cutting, my SIL could see that the trunk was rolling slightly, back and forth, with each cut.
That tree it landed on is holding it up off the outhouse roof completely, now!
With the top and most of the branches removed, a lot of weight has been taken off of the fallen tree. We now have to figure out how to keep that weight off the outhouse while trying to get it down. They’re thinking of using rachet straps and another tree.
It will have to wait, though, until the next time they’re able to come out here and work on it.
Today has been a VERY windy day, and the entire time we were out there, we could hear squeaky noises from other dead trees in the spruce grove, rubbing against each other. There is one dead tree close to the house that died after we moved out here. It needs to be taken down as soon as possible, as this one could potentially fall onto the house. At least with the direction of today’s winds, if it did fall, it would have been away from the house. The problem with all these dead trees that need to be cut down is that we’re often far too windy to do so safely!
I am so grateful that they were able to come out today and get so much progress on this tree. It’s still possible that, in the process of trying to get that tree down, it could end up destroying the outhouse, but at least now there is some hope of saving it. We’d fixed up the inside of the outhouse already, and had plans to fix up the roof and replace the moss covered shingles with some of the metal roof pieces we still have lying about. More repairs will need to be done now, of course, but that’s okay. If we can salvage it, we can get a few more years out of it. Hopefully, we’ll have the outdoor bathroom with composting toilet we are planning to build done well before this outhouse is no longer useable! The location I have in mind for it needs to be kept open for a while longer, though, as we’ll be dragging dead trees through there for some time, as we harvest them. They will mostly be used to build more raised garden beds.
Lots of work to do, that’s for sure! It’s going to be a lot easier, now that my brother’s equipment it out here, though. My goodness. We’re probably going to be able get more done whenever my brother is able to come out on the weekends, than we’ve been able to do in the 7 years we’ve been living here, just because his tools and equipment will be available.
What a concept.
The Re-Farmer
The Re-Farmer 