Starry skies, shelter progress and a surprise visit

First, the cuteness!

With all the tasks outside I’ve been working on, I’ve been forgetting to take pictures of kittens!

Today turned out to be a fairly productive day. I’m actually a bit surprised, all things considered! πŸ˜„

The girls and I headed out around midnight to watch for meteors. We did see some, as well as some Northern lights.

We set up the tripod and just randomly took photos of different parts of the sky, hoping to catch something. We did catch some meteors in a few photos that were so small and faint, we didn’t see them as they happened. There were a few brighter ones that happened in between shots, and one huge, bright one with a bright green tail that flashed by. That one was awesome!

In the photos in the Instagram slideshow, the third one has the spotted streak of an airplane’s lights. We actually have a pretty busy sky with planes and satellites visible. It was a gorgeous night for starwatching, that’s for sure! We could see even more stars than the night before.

Unfortunately, once we got back inside and I finally went to bed, I wasn’t able to sleep for most of the night, so my daughters were sweet enough to take care of some of the morning stuff for me so I could sleep in. Once I did get outside, my priority was watering the garden before it got too hot. Our expected high was 27C/81F, which I’m sure we passed. As I write this, it’s past 6:30pm, and we’re still at 25C/77F, with the humidex putting us at 27C/81F.

While I was watering the garden beds, I took advantage of the fact that we have some lovely grass clippings that has been lying out long enough to start drying, and topped up the mulch on some beds. For a few, I just scooped up some armloads, but in some areas I brought out the wagon and raked up a windrow. I gathered a couple of wagon loads, but there’s still plenty left to collect. I want to make sure to collect the thickest areas, as they are thick enough to actually kill the grass below if they’re left where they are. I’ll take care of the rest, tomorrow, though.

Once the watering was done, I paused for … brunch? … then headed back out again. I had one last edge of the isolation shelter boards to paint, and then I wanted to calculated and cut the next set.

I had a few pieces I could cut out of the true-to-size 2×4’s I had, though I ended up having to cut off rotten/uneven ends before I could make my measurements on these ones. Once I got four pieces that will be joining the front and rear frames, that was it for the true to size boards. The next ones had to be cut from a regular 2×4’s. I actually need 2 more of that length, but I got distracted and forgot.

After I’d laid the newly cut boards out to brush the dust off, I was going to give the paint more time to dry and switch out the foam bumpers on the gate and replace the twine and pin for the sliding bar – all of which were disintegrating from being in the elements for several years.

I happened to step out of the garage when my phone dinged at me. I had a text message from my sister!

There is no signal in the garage, so I got it several minutes after she’d sent it, and she was asking if I was home.

It turns out she was in the area, visiting the local cemetery.

Also, did I want some cucumbers? πŸ˜„

What she didn’t say was whether or not my mother was with her. I did tell her that I’d gone to the cemetery last month and left fresh flowers at our family graves – and said no, thank you to the cucumbers. The last time she gave us cucumbers, we couldn’t finish them all, even after making a dozen jars of pickles!

I figured her ability to receive texts would be about the same as mine, so I had no idea when she was going to get my answer. I had to go to the house to get some of what I needed for the gate, and made sure to grab the gate key, as well. As I was walking back to the garage, I could see through the trees.

There was a car at the gate already! πŸ˜„

I’m glad I grabbed the gate key!

Also, as I write this, I am eating a cucumber salad my daughter made from the cucumbers my sister gave us. πŸ˜„ Not as much as the last time, though, so we won’t be overwhelmed!

I ended up giving my sister a tour of what we’ve been doing around the place, including the garden, of course. She wanted to see it as she wasn’t sure she’d make it out this away again this year. My sister being my sister, she took lots of pictures, including some with me in my grubby, torn up work clothes! πŸ˜‚ Then we sat in the the shade on one of the benches I made and just talked. She was still planning on visiting my mother on her way home – and drop off more cucumbers! – so she didn’t stay too long.

As she was leaving, I followed along and worked on the gate. We use sections of pool noodles as bumpers. With where the hinges are attached to the posts, when the two halves of the gate swing outwards, towards the road, the metal gate hits the metal posts, so the bumpers prevent more damage. Small sections are also added over the hinge pins to protect them from the elements.

The pin for the sliding bar was just a long screw with its tip cut off, tied to the gate with twine. The twine was barely holding together, and the screw was rusting, so I picked up a long screw eye to replace it. I use mason line instead of twine. Having the screw eye to attach the line to was a lot more secure than just knotting bale twine under the head of a deck screw! πŸ˜„ I was even able to attach the line to the gate in a more aesthetically pleasing way, too. The only potential problem I see is that the weight of the screw’s eye might cause it to fall out, however there’s enough slack in the line that I could use it to wrap around the end of the screw eye and hold it in place.

At least, that’s the theory!

Once that was done and everything was cleaned up, it was back to the garage.

The painted boards were just dry enough to move them off the sawhorses and onto the pallet to finish trying, and I was able to get the first sides painted on the newly cut pieces.

Once all these pieces (including the two more longer ones I need to cut) are painted, I can then assemble the external frame of the isolation shelter. Once that’s together and secured to the pallet floor, I’ll be able to figure out the best way to put together the inside parts and get the measurements needed.

I’m hoping I have enough salvaged lumber to finish the frame, including the pieces that will support the floor of the second level. I have wider boards left over from another project that will make a good floor on the second level.

This above Instagram slideshow has my original sketched plans. I’ve had to change some things, but the general concept is the same. The second level will have a floor covering 3/4 of the space, but there will be room to add other things, as inspiration strikes. All of the inside stuff needs to be put in before the mesh walls or the roof are added. Though if I can figure out the best way to do it, a hinged roof would certainly make it easier to access the inside, should something need repair or replacement.

I’m happy with the progress made so far. I just hope I didn’t screw up on my math!

The Re-Farmer

Leave a comment