Today is working out to be a rather pleasant day, overall. We’ve got bright sunshine and – as I’m writing this – there doesn’t seem to be much wind.
Unlike this morning!
I got the morning rounds done which, today, included shoveling out the space we back the truck into to load it up for the dump.
We got a fair bit of snow last night, though it was very light and fluffy and easy to shovel – and clear off the solar panels for the kibble and water shelter lights! We’re going to need to break little Spewie out to clear the driveway, but not today. We’ll be getting winds off and on today, while tomorrow is supposed to be much more pleasant. We’re supposed to reach a high of -11C/12F this afternoon, but the -16C/3F low of the day is supposed to happen around 7pm this evening, and then it’s supposed to keep warming up overnight until a high of -4C/25F tomorrow, and a high of 0C/32F on Monday!
I am so looking forward to the warmer temperatures!
Along with some shoveling to make room for the truck by the house, I also checked the ejector. The septic pump didn’t turn on during the night, but by the time I heard it running this morning, it was off before I got into the basement to check it. With my theory that gunk from inside the short lengths of pipe between the filter cannister and the back valve got loose and is now stuck in the back vale, I tried an experiment last night. I’d picked up some Dawn Platinum dish detergent to keep in the basement, for when I put in a clean filter basket and need to wash the spare. When I topped up the filter last night, I squirted in some detergent, first, then topped up the water before closing it up. I figured, with the filter draining like it does, it’ll take the detergent with it, and that would help clean out the pipe lengths and back valve the next time the pump turned on.
When I checked the ejector, I could see that water had splashed out for quite some distance, since the area was no longer covered in snow. Beyond how far the water is ejected, it flows down the metal sheet that diverts the flow towards the low area, and that section is completely covered in snow with a water tunnel under it. The snow and ice gives a good indication of how well the ejector is working.
Once I finished my rounds, I backed the truck up to the house and started loading it with garbage while my daughter checked the house and changed whatever garbage cans looked like they needed it, before helping me get the rest of the garbage and recycling out of the old kitchen.
The good thing about the old kitchen not being heated and not having much insulation: the garbage freezes in the winter, and there is no smell! Very important, since we go to the dump more more infrequently in the winter.
Once the truck was loaded (and clear of cats!), I headed out to the dump. The highway was covered in packed snow, with blowing snow buffeting me, so I was definitely taking my time for the drive! Another wintertime bonus: the area in front of the pit is covered in packed snow, so I’m less concerned about driving over something sharp enough to puncture a tire. 🫤
When I got back, my daughter had a couple of bags for the burn pile waiting outside the door, so I added those to the pile. With the warmer weather coming up, we should be able to finally burn that pile of mostly diseased branches, and do the burnable garbage, too. Our burn barrel has finally fallen apart, and the burn ring is full of ashes, so we can’t use either until we can clean those out in the spring or summer.
Not long after I was back, I got a phone call about my brother to talk about the septic pump. After talking about various possible causes throughout the system, we basically came down to the same conclusion: something is stuck in the back valve again, and the only way that could have happened is if there was something in the pipe between the filter cannister and the back valve that came loose. Especially since it was working so well at first. My brother had checked the back valve thoroughly, and it was in excellent condition. As for the pipe that attaches to it, it’s an elbow that is directly attached to the back valve, and he knew that elbow was clear. There’s about 6 inches of pipe between elbows, then another 8 inches or so from that pipe to the filter cannister’s outflow. Not a lot of distance for gunk to build up, but if that rag managed to take however many years it did, to work its way through that little bit of pipe and get stuck in the valve, it’s hard to say what else could have gotten stuck in there that we couldn’t see in between those elbows.
I told my brother what I’d done with the detergent, and he agreed that this might help. The alternative is to take it all apart again, and he wants to avoid that. The more things get taken apart, the more likely something will break. We’re keeping an eye on it, it’s still working, even if it does need to have the filter primed to get it going sometimes. My daughter was in the shower while were were talking, so I went to the basement to see if the pump would turn on, but it didn’t. The tank had been emptied too recently for one shower to trigger the pill switch again. As we were talking, though, I noticed something about the level of the water in the filter.
It was pretty much exactly level with the top of the pump, which is where the back valve is. The back valve is pretty much level with the inflow opening in the filter cannister – at least it is, now that I have something under the cannister to support its weight – and the water level almost completely covers it. So it looks like the water level is equalizing with the height of the valve.
I do wish I’d known more about the pump before all this started. Particularly about the back valve and where it was. Chances are, I would have made the connection with the back valve having problems, much earlier – and possibly gotten it fixed before the ejector froze solid!
Ah, well. Live and learn!
After I got off the phone with my brother, and my daughter was done her shower, I went back down to tend to the filter. I got my daughter to go with me so I could update her and show her what I was doing with the detergent, and what we hoped it would accomplish.
If the detergent doesn’t seem to be helping, I might want to just add some of the Free Flow powder to the filter before topping it up with warm water, instead of cold. While we still use the Free Flow enzymes and bacteria down the drains regularly, those are great for the plumbing and the septic tank, but doesn’t do much for that little section of pipe between the filter and the pump.
All of this stuff, we are extra careful to be sure it won’t damage the pipes or mess with our septic system. That’s something we just never had to think really about when living in the city!
So that is where were at with the septic issues. Now that we finally got the dump run done, we don’t need to go anywhere for some time. With the weather warming up, that means we can catch up with things in an around the house again!
I am just itching to be able to work outside again!
The Re-Farmer
The Re-Farmer 