Have I mentioned, my brother is the best?

Today, he worked on our septic plumbing again. This after already spending a couple of hours outside, doing things among their stored items, and being sick, too!

A few days ago, they’d gone out for dinner and he’d ordered a “Canadian burger”. Yeah, one of those virtue signaling things so many places have been doing, suddenly pretending to be patriotic because our government and media have told us to hate the US right now. Just a few years ago, the same people were calling Canadians who flew the flag and displayed patriotism racists and Nazis and white supremacists, just like Americans – or at least the Americans they tell use to hate. People were arrested for flying Canadian flags, banned from businesses, their property vandalized and even physically assaulted. Now, suddenly “American style patriotism” is no longer bad. Funny how easily people can spin on a dime and not see their own double standards.

Ironically, the restaurant was a US franchise.

Anyhow, the burger made him incredibly ill. He thinks the beef wasn’t fully cooked and he was hit with e. coli. He said he was still operating at only about 80%.

His 80% is more than a lot of people’s 100%, though! The guy is amazing. I don’t know how he does it!

I had other things to get done before I went back to working on the basement, so I didn’t get to help or watch while he figured out how to install the new bypass. I cleared another section in the new basement enough to mop it, then joined him after I set the blower up to dry the concrete floor. By that, he was pretty much done and ready to start testing. He was quite happy that it worked out much easier than he expected.

This is what he installed.

View this post on Instagram

A post shared by The Re-Farmer (@the.refarmer)

The pipe to the ejector now has the T insert in it. Under normal circumstances, effluent would just go straight through this pipe and to the ejector, out by the barn.

In the next photo, you can see the ball valve in the emergency diverter pipe, in the open position.

I was really curious how he would work with that diverter pipe. It had a very strong curve to it, in the wrong direction! What he ended up doing was first, rotating it so that the curve was in the other direction. Then he used his heat gun on a substantial section of it, until he could straighten it out enough that it could be attached to the T. He had to stand there and hold it straight until the pipe cooled enough to hold its new shape.

Of course, he had to cut sections out of both pipes to install the T and the ball valve.

While this was being worked on, the family was concerned about using the water. The septic pump was turned off while he worked, of course, but it had gone off not very long before he started, so there wouldn’t have been very much water in the greywater side of the tank. Any time I got a message, asking if it was okay to flush or shower or whatever, I encouraged them to use plenty of water, so we could have something to test with!

Before testing it, my brother went outside to check the diverter at the house end to make sure nothing got knocked askew while he was manipulating the pipe around. Once that was done and he was back inside, he turned the pump on manually – an easy thing to do, thanks to the second switch he installed for that! – and checked for leaks. There was a tiny leak at the elbow before it goes out of the house, so he tightened the screw clamp and added a second one, just to be safe. There was no leak when he turned the pump on again.

So we knew that effluent was flowing through the open ball valve in the diverter. We could see in the filter that water was flowing, and we could hear it, too.

We didn’t test for long, though, as we didn’t want to actually empty the tank.

The next test was with the valve closed. We were both watching that filter closely and, while there was movement, it didn’t look like it was flowing. The only way to know for sure, though, was for one of us to go to the ejector, while the other turned the pump back on.

My brother went to the ejector, then video called me on Facebook messenger, so we could see and show each other what was going on. Once he gave the go ahead, I closed the ball valve again and turned the pump on.

Nothing happened.

No flow out the ejector.

We waited a while to be sure, before I shut off the pump, then opened the ball valve again.

Which is just awesome. Without the valve, the only way to test if the ejector is working would require switching pipes – then switching back again when the test failed. Not only is that messy, but every time that is done, there is a risk of breaking something.

What this means is that the emergency diverter is now a permanent set up. Once the ejector is working again, we can close the valve, but can be ready to simply open it again, if we have more problems in the future.

We won’t be able to do anything with the ejector until things warm up a lot more. My brother thinks it’s most likely still frozen at the bottom. I think there’s something blocking the venturi valve. Worst case scenario, the pipe from the house itself is clogged, somewhere. That’s more than 300 feet of pipe, and a clog could be anywhere in there!

Either way, we won’t be able to find out until spring thaw.

Until then, the emergency diverter is our life saver!

Once the bypass valve was installed and tested, my brother headed out for home, with plans to visit our mother along the way – and bring her a hot supper to share. No meals on wheels on the weekend, so I’m sure she would appreciate it. I just hope she treats my brother well this visit. She’s really been on about how he was “keeping secrets” from her because they were so quiet about selling their acreage and moving, even though she knew that was why they brought their equipment here to the farm. I think she even forgot that they’d done that. Ah, well. I’ll find out later tonight!

I am quite pleased with how things have gone today. While I don’t have my seed starting set up in the basement yet – quite a bit more work will need to be done down there, still – I did get good progress down there, and was able to reclaim my work station. My brother got the bypass valve installed and, while we were doing that, my daughter was spring cleaning in the kitchen and dining room. She was able to get all the cat hair off the walls, ceiling, cupboard doors, the ceiling fan, pictures on the walls, curtain rods, etc. That alone was a HUGE job. With so many cats, of course there’s cat fur everywhere, but when it sticks to the walls and anything on them, it doesn’t want to come off! It won’t even vacuum off. She had to get right in there and scrub. She did an amazing job, though by the end of it, she was really needing painkillers!

So was I, by the end of it all. I haven’t gone up and down the stairs so many times in one day since we cleared and cleaned out the basements. Yes, I took my prescription painkillers in the morning, but even those can only deal with so much, and I can’t take more during the day, since I save my second allowable dose before bed. Pain is more of a problem when I’m lying down and trying to sleep than during the day. I can put up with it more when I’m up and about. Once I’m in bed, it keeps me from getting sleep. I did take some acetaminophen, though, to help take the edge off, at least.

I have a few last things to do in the basement before I call it for the day. Tomorrow is Sunday, which I try to keep as a day of rest. This will make sure I don’t over do it and put myself out of commission for days. As long as we get something set up for seed starts within the next week, it should be good. Most, if not all, of the seeds I ordered should be in by then.

From there, it’s the fun part: going through all the seeds and choosing which ones to start and when!

The Re-Farmer