I’m happy to say that I pretty much finished all the stuff I needed to get done before the hard freeze hit, but I just had to share this first.
One of the adult females we’ve been trying to get is Adam. She sometimes allows us to pet her, but we just haven’t been able to get her into a carrier.
As I was going through the sun room this evening, I spotted her.
That’s her, peeking at me from one of the carriers, back in its spot on the shelf.
Well, at least she associates carriers as a cozy spot to hang out. If only she would do this when we can get her to a vet for a spay!
*sigh*
The first thing I needed to do when I headed outside this afternoon was set up the emergency diverter for the septic, now that the tank area is covered in straw. In the basement, I grabbed a length of foam pipe insulation to put around the pipe first, then pushed it as far as it could go against the wall. When the ejector froze last winter, every time the pump turned on and greywater was pumped out the emergency bypass, I would hear vibrating noises of pipe against concrete that always got me nervous. I’ve become rather paranoid about our septic system! The pipe insulation I used is one of several lengths I found in the old basement that is meant to go over water pipes, not the larger pipe from the septic, but it’s split lengthwise, so I could get it around the half that was against the wall. That’s all I need.
Once outside, I had to remove the insert plug my brother had put on the outside end, which was secured with a steel ring hose clamp. The plug he got has the ridges that help keep it from being pushed out by pressure, plus the tightened the ring enough to squeeze the end of the pipe tightly. Basically, it would have been a great permanent plug. Unfortunately, it’s not meant to be permanent. It’s meant to be taken out as needed. An ordinary, temporary, end cap would have sufficed, but my brother is very thorough! It took considerable effort, and an adjustable wrench, to finally get it out. Plus a flat head screwdriver to create space between the pipe and the plug, just to be able to move it at all!
Once the end was open, I could set it into the PVC pipe I had ready. Then I used the collection of boards, bricks and scrap pieces of Styrofoam insulation to create a gradual slope from the rigid pipe and along the flexible hose so that grey water could be diverted far from the house, into the maple grove.
Hopefully, we will never need to use this again, but it’s good to have it set up and ready, just in case!
The down side of having that set up is that it blocks access around that corner of the house from where the bale is. Once the emergency diverter was set up, I got the wagon and the wheelbarrow to get straw to the various areas I wanted to mulch. When it came time to do the old kitchen garden, I had to go the long way around with the wagon and wheelbarrow loads of straw. Not a problem. Just a bit inconvenient.
The first area I worked on was in the main garden. The above picture is a little preview. By the time I was done, light was starting to fade fast. I decided to do a quick, impromptu garden tour video. I’ll be working on editing that tonight, and will likely have it ready to post tomorrow. I have a few hours to kill before I have to go to my mother’s for her bed time med and personal care assist.
Before I finished for the night, I grabbed one more wheelbarrow load of straw and set it by the covered greenhouse. Tomorrow, I plan to clear out the water bowl house and set straw on the floor, removing the huge crocheted blanket entirely. We’ll set that over the kibble house roof as extra insulation. I expect to have leftover straw, and will find other places to leave it for the cats. The cats really, really like the straw! The last thing to do will be to rake up around the bale to clean things up, then cover it with a tarp for the winter.
I am so glad we were able to get another straw bale this year – and that the renters had one to spare! Next year, when it’s time to use straw as mulch on the garden beds, I plan to run it through the shredder chute on the wood chipper, first. In the past, I tried using the push mower to shred the straw, but it clogged up the air filter so quickly. We only have my brother’s push mower now, so I’m not going to be doing that with his equipment!
Getting this last bit of progress done before things got too cold feels so good! 😊
The Re-Farmer
The Re-Farmer 